Bigger Cam Gain Anything?- Spun Bearing
06-07-2004, 12:59 PM
#1
On The Tree
Thread Starter
Join Date: Sep 2002
Location: Texas
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Bigger Cam Gain Anything?- Spun Bearing I have a spun rod bearing in my heads/ cam/ spray car. My question is if I go with valve relief forged pistons, would I get much benefit in a higher duration/ lift cam????? I currently have a .232.236/.595.601 lsa114.
Any thoughts?? Just wondering before I spend the money on new pistons. If the larger cam won't make more power, I dont know that I want to spend the money on the pistons. If it would help, I need to step up. BTW, I think I am going with stock rods with ARP rod bolts, and factory crank.
Thanks.
Any thoughts?? Just wondering before I spend the money on new pistons. If the larger cam won't make more power, I dont know that I want to spend the money on the pistons. If it would help, I need to step up. BTW, I think I am going with stock rods with ARP rod bolts, and factory crank.
Thanks.
06-07-2004, 02:10 PM
#2
TECH Senior Member
You might want to upgrade the whole bottom.
Callies Rods, Diamonds slugs and get your crank nitrated. This way you won't have to do it again soon.
What were your revs??
Callies Rods, Diamonds slugs and get your crank nitrated. This way you won't have to do it again soon.
What were your revs??