Help with my TR 230/ TEA 5.3 combo
03-16-2003, 08:26 PM
#1
Staging Lane
Thread Starter
Join Date: Dec 2002
Location: Etters, PA
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Help with my TR 230/ TEA 5.3 combo I'm swapping these on to a built ARE short block with Ross pistons. I'm looking to maximize power N/A, so I need some insight on head milling and CR. The heads were only milled .005 for clean up. I'd like to run a 11.2 or more CR. Any assistance with this would be a huge help.
03-16-2003, 10:03 PM
#2
On The Tree
iTrader: (1)
Join Date: Oct 2002
Location: Ocala Florida
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help with my TR 230/ TEA 5.3 combo Mine are 10 thousandths and I am right around 11 to 1 or a bit over. I think 15 thousandths would be close to or at 11.5 to 1.
