I purchased TSP228/224 .571/.568 112LSA +2
#1
TECH Enthusiast
Thread Starter
I purchased TSP228/224 .571/.568 112LSA +2
Well, the neverending dilemma of which cam I purchase finally came to an end this weekend. I called up Trevor at Texas Speed and Performance and through talking to him, decided to go with a Comp custom grind 228/224 .571/.568 112LSA with 2 degrees of advance ground in. TSP usually goes with the Comp XE-R lobes which would have made the lift .588/.581 but I'm paranoid about PVC, so I went with the slightly smaller XE lobes. I think that this setup combined with the rest of my planned mods and CHS Stage 2 heads should result in a pretty lethal setup!! I will have my dynosheet on Friday, May 23rd!!!
Anyone else running a similar cam and mods in an A4?
<small>[ March 17, 2003, 11:50 AM: Message edited by: Constrictor 98TA ]</small>
Anyone else running a similar cam and mods in an A4?
<small>[ March 17, 2003, 11:50 AM: Message edited by: Constrictor 98TA ]</small>
#2
Re: I purchased TSP228/224 .571/.568 112LSA +2
Congrats! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
You'll be very happy with their cam....
just for comparison, here's what I made with my cam...
364rwhp ( unlocked )
381rwhp ( locked )
that's thru a SY4000 and 3.73s...
I'll prob be adding their 5.3 S2 heads this summer...
-Alex
You'll be very happy with their cam....
just for comparison, here's what I made with my cam...
364rwhp ( unlocked )
381rwhp ( locked )
that's thru a SY4000 and 3.73s...
I'll prob be adding their 5.3 S2 heads this summer...
-Alex
#3
TECH Enthusiast
Thread Starter
Re: I purchased TSP228/224 .571/.568 112LSA +2
So with Stage 2 heads, Im sure you could have expected another 30 RWHP or so...that should put me over my 400RWHP goal! WOOHOO!! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />