LSmokin1

iTrader: (6)

Well finally got around to putting in the cam and springs and ****. ME and my buddys did it in 3 day, working on it from 5-9.So 12 hours aint that bad for the first time puting a cam in. Monday got it all torn down, cam in, new timing chain installed, new oil pump, and got the front all put back together. Tuesday was all devoted to putting in the dual valve springs, whihc i might add is very time consuming. Only problem we had was after we completey finished the driver side, we realized that we ddint seat the valve seals right, so we did the otherside correctly and had to redo the driver side, aftyer that put the valve cover on, Tonight, was a breeze if you could say, put new ls6 intake on, pulley, waterpump, radiator, fans all that stuff. Then the moment of truth, did i get that damn oil pump o ring on right or not. Well it fired right up, had oil pressure in 5 seconds. On the stock tune it didnt want to stay running, so we held the tb little bit open till it warmed up and shut it off and checked everything. After we cleaned the mess up we moved the car outside and after a while it found its idle at about 800rpm, and i would have say at the point i got a woody, that thing sounded so badd *** at idle. Nest tuesday it going to speed inc for a tune and weill see what she puts down. Im hoping for 400 rwhp.

Overall for the install of everything, i expected it too be a little harder than it was, if you just take your time and dont rush **** it will be all good.

goinbroke

Congrats on the setup. Should put down 400 hp. But this cam loves a good set of heads. Good luck.

SSean

Congrats. That cam put down 393rwhp on a friends '98 lM6 Z28 last weekend. He doesnt even have an ls6 intake or a pulley yet!

Tranzor

Congrats on the install! I just ordered my TSP 231/237 and I'm already stoked...

greekss

im thinkin ull put down 405 at least with a good tune

blkZ28spt

Good to hear!! Especially about the install. I'll be interested to see your dyno printout.

I plan on doing the same thing next spring...........damnit I can't wait that long!!! The one thing i've really wanted since i got the car was a cam so it would have old school muscle car lope!!! I just want a car that sounds like a badass muscle car, RIGHT NOW!!!!

Z'mnypit

iTrader: (58)

Congrats... I installed my TSP 231/237 & Patriot dual valve springs, last weekend.... Like you said piece of cake... I havent gotten mine tuned or dyno'd yet... But make sure you post up your #'s...

hourang

iTrader: (6)

nice i plan on about the same setup, very interested in seeing your numbers

foff667

iTrader: (2)

congrats, like the rest cant wait to see the #'s but you should be between 390-410 to the wheels...have fun

lata
Bill

-Joseph-

iTrader: (12)

Gald the install went smoothly! Get that thing tuned and then get to the track Be sure to post up your dyno/track results, and most of all, ENJOY!

-Matt-

Tranzor

Yeah I wanted a cam too, but I thought I could wait until next spring just like you. But I was wrong... I helped a friend install his FM11 cam last weekend and when I heard it for the first time, I knew I needed a cam NOW.

So the next day I ordered a cam package from TSP... now I just have to sell all my worldly possessions that aren't attached to my car in order to afford it.

zyal8r

Congrats! on the install, be ready for a rear end!!!!!!!!!!!

SouthFL.02.SS

What he said!

badazzhawk

get ready and save up for a new rear end 12bolt or 9in...but enjoy..that cam pulls like a ****

LSmokin1

iTrader: (6)

Yea its only a matter of time till it goes, but ill give it hell till it does!

git_sum

iTrader: (10)

I heard that ****, $961 dollars invested and i still have a tune, stall, and headers to go :cry, oh i forgot about the tires, that'll be another $350 or so

lock down

does anyone have any sound clips with this cam and true duals with stock heads?

Tranzor

Tires... man, that's one more thing I need. Time for some ET Streets... pretty soon I'm gonna have to sell a kidney to afford this hobby.

SouthFL.02.SS

http://www.ls1sounds.com/true_duals/...rner-dumps.wma

tuffass

You bastard! I cant order mine for 2 more weeks! I'm so excited over this cam it's not even funny... Cool thing is that I'll be running almost the same set up as SouthFL.02.SS so I cant wait to see what #'s you get...