View Full Version : CARTEK C-5 VETTE 10.84 at 127.93


STEALTH 415 C5
04-04-2002, 10:04 PM
I ran the time at ATCO today,the sixty foot was 1.51,3520Lbs race weight.Iron block 408 stroker Naturally Aspirated.Best MPH of the day was 128.57.The car is a six-speed.

bspz28
04-05-2002, 12:12 AM
Mike your car is awesome!!! Nice running man <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

<small>[ April 04, 2002, 11:14 PM: Message edited by: bspz28 ]</small>

LS1LT1
04-05-2002, 02:01 AM
<img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> Wow! Congrats again Mike. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> <img border="0" alt="[Z06 Corvette]" title="" src="graemlins/z06.gif" /> <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />

Jason99T/A
04-05-2002, 02:17 AM
Very nice! What size cam are you using? Any dyno graphs?

STEALTH 415 C5
04-05-2002, 02:34 AM
The cam specs are similiar to the MTI R1 cam,the cam and compression were kept mild because at the time I was having the motor built the car was my daily driver.The dyno sheets were posted somewhere on this site about six weeks ago,they were posted by tekhombre.

mattf2
04-05-2002, 09:03 AM
3520# race weight?

What else do you have in there? An anchor?

Even w/ all that weight, an awesome time/ mph!

What clutch is in it? Cartek?

JS
04-05-2002, 09:16 AM
Matt u never saw Mike.

Mike is UM???? A BIG GUY.And he's NOT FAT.The car weighs 3500+

He's the man for now.

JS

STEALTH 415 C5
04-05-2002, 10:01 AM
Thanks guys,I'm running a Cartek clutch.

WS6 TransAm Girl
04-05-2002, 12:10 PM
CONGRATS MIKE!!! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> I called that, I said 10.8 LOL I'm a good guesser <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" /> That's HAULING butt... talk about rowin some gears.

Matt- Mike is a big guy, as in like WWF big, not fat, someone I would never want to see pissed off! <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />

XtraCajunSS
04-05-2002, 12:27 PM
Great time man! I'm building an iron 409 right now and my car is a PIG too. It's nice to get some idea of what's possible. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

What gear ratio and tire size are you running?

Any info you can share would be great!

Thanks,
Shane

<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

STEALTH 415 C5
04-06-2002, 12:50 AM
Cajun,It's a 26-11.5x16 ET Street,4.10 gear.

Tekhombre
04-06-2002, 03:39 AM
Mike, here are the time slips.

<img src="http://www.cartek.net/images/mike1084.jpg" alt="" />

<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

LEO
04-08-2002, 07:23 PM
Congrats great runs!!! <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />

STEALTH 415 C5
04-09-2002, 02:29 PM
I backed up the time with four ten second runs on Saturday at the GM EFI Shootout/Corvette Challenge,I went 10.87,10.89,10.89,10.97 at Raceway Park,it was good to get it in the tens again at a different track.

Pro Stock John
04-09-2002, 04:14 PM
That's awesome to run 10's at a different track.

What rpm are you shifting at?

CHRISPY
04-09-2002, 04:17 PM
Congrats!! I didnt realize it was an iron block!!
Good job!
Chris

STEALTH 415 C5
04-09-2002, 05:48 PM
Shifting at 6500rpm's,The car is a real heavyweight,Saturday on Raceway Park's scale I weighed my car after I ran my friend Brent with his Cartek X-Package Z-06,he gave me a good race,I went 10.89 to his 11.25,he weighed 3240lbs w/driver,I weighed 3511 w/driver,with reserve fuel,a lightweight racing seat,no passenger seat,my two rear mufflers dropped,I still had two Dynomax bullets in the tunnel of the car,lightweight CCW drag rims.I spoke to Valvegod who told me the iron block was 100lbs heavier than an aluminum LS1,this combined with my 280lbs,and the new roll bar really weighs the car down,I need to find a 150lb driver who's driven a 10-sec manual trans car.I'm dying for Cartek to build an aluminum block 408-427 and drop it in a lightweight Z-06 and see what it does.

Pro Stock John
04-09-2002, 07:44 PM
I like the iron block, I have a 422ci ARE motor in my car but I tip the scales at 3700-3740lbs raceweight...

I printed your slips, they are awesome!

Perhaps the iron block hataz will stand up and take note now.

I figured 75lbs for my iron block.