Vid's from last weekend: romanss & wade from ARE
#1
Vid's from last weekend: romanss & wade from ARE
A couple vid's from last weekend, the season opener for the local club (Motown Muscle) at St. Thomas Dragway in Canada
romanss runs 10's NA
romanss runs 9's on the hose
Wade from ARE runs his C5
<a href="http://harlan.sketchy.net/video/are_c5_tries_for_8.mpg" target="_blank">Wade tries for 8's <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> </a>
Wade ran a 9.25 @ 153, but i missed the run <img border="0" title="" alt="[Sad]" src="gr_sad.gif" /> The first run he hit the button about 40 ft out by the looks of the vid. The car is SICK!!
<small>[ May 01, 2002, 11:31 PM: Message edited by: y2khawk ]</small>
romanss runs 10's NA
romanss runs 9's on the hose
Wade from ARE runs his C5
<a href="http://harlan.sketchy.net/video/are_c5_tries_for_8.mpg" target="_blank">Wade tries for 8's <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> </a>
Wade ran a 9.25 @ 153, but i missed the run <img border="0" title="" alt="[Sad]" src="gr_sad.gif" /> The first run he hit the button about 40 ft out by the looks of the vid. The car is SICK!!
<small>[ May 01, 2002, 11:31 PM: Message edited by: y2khawk ]</small>
#3
TECH Enthusiast
Join Date: Nov 2001
Location: Richardson, TX, USA
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Re: Vid's from last weekend: romanss & wade from ARE
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by y2khawk:
<strong><a href="http://harlan.sketchy.net/video/are_c5_tries_for_8.mpg" target="_blank">Wade tries for 8's <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> </a> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">What happened in that video, what did Wade break? <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
<strong><a href="http://harlan.sketchy.net/video/are_c5_tries_for_8.mpg" target="_blank">Wade tries for 8's <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> </a> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">What happened in that video, what did Wade break? <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
#7
TECH Enthusiast
Join Date: Nov 2001
Location: Toronto, Canada
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
Re: Vid's from last weekend: romanss & wade from ARE
Two corrections
1\ The vette is a hydraulic cammed car
2\ It still has IRS
It appears from talking to nick that on that run the tranny lines blew up. The fluid dumped all over the exhaust and gave a great mid-track smoke show.
The whole point of the project was to build a car from parts that ARE would sell to any customer looking for a high quality emissions legal monster engine <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> . This is all part of the R&D project to push the limits of a commercially available non-exotic engine. Nick and Wade through this R&D are finding ways to make the big motor cars more durable and bullet proof. The ARE C5 is a resleeved aluminum LS1 block with ported LS6 heads and a direct port TNT kit that Nick designed.
There is almost no difference between the motors in Wade's C5, mine or Romans. The big difference is in suspension a good driver, and a ton of knowledge of how to properly use Nitrous.
Paul
<small>[ May 02, 2002, 01:32 PM: Message edited by: Warbird ]</small>
1\ The vette is a hydraulic cammed car
2\ It still has IRS
It appears from talking to nick that on that run the tranny lines blew up. The fluid dumped all over the exhaust and gave a great mid-track smoke show.
The whole point of the project was to build a car from parts that ARE would sell to any customer looking for a high quality emissions legal monster engine <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> . This is all part of the R&D project to push the limits of a commercially available non-exotic engine. Nick and Wade through this R&D are finding ways to make the big motor cars more durable and bullet proof. The ARE C5 is a resleeved aluminum LS1 block with ported LS6 heads and a direct port TNT kit that Nick designed.
There is almost no difference between the motors in Wade's C5, mine or Romans. The big difference is in suspension a good driver, and a ton of knowledge of how to properly use Nitrous.
Paul
<small>[ May 02, 2002, 01:32 PM: Message edited by: Warbird ]</small>
Trending Topics
#9
On The Tree
Join Date: Nov 2001
Location: Detroit, MI
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Re: Vid's from last weekend: romanss & wade from ARE
Those were awesome to watch live. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Matt: Did you happen to get a vid of that Civic running 9s? I know it was a gutted ricer, but it was still sick to see one go 9.76 at like 15x!
Matt: Did you happen to get a vid of that Civic running 9s? I know it was a gutted ricer, but it was still sick to see one go 9.76 at like 15x!
#10
Re: Vid's from last weekend: romanss & wade from ARE
Yep
I think i got vid of just about everyone that ran that day.
I was official camera bitch <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Sucks having a car in pieces <img border="0" title="" alt="[Sad]" src="gr_sad.gif" />
I think i might have some of the firehawk killing RAM!!!!! <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
I think i got vid of just about everyone that ran that day.
I was official camera bitch <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Sucks having a car in pieces <img border="0" title="" alt="[Sad]" src="gr_sad.gif" />
I think i might have some of the firehawk killing RAM!!!!! <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
#11
On The Tree
Join Date: Nov 2001
Location: west coast reppin
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Re: Vid's from last weekend: romanss & wade from ARE
goddam those videos are bad ***.........both of those cars are wicked ****..............congrats to both
<img border="0" alt="[Camaro]" title="" src="graemlins/camaro.gif" /> <img border="0" alt="[Camaro]" title="" src="graemlins/camaro.gif" />
<img border="0" alt="[Camaro]" title="" src="graemlins/camaro.gif" /> <img border="0" alt="[Camaro]" title="" src="graemlins/camaro.gif" />
#12
Launching!
Join Date: Jan 2002
Location: ONTARIO/CANADA
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Re: Vid's from last weekend: romanss & wade from ARE
A few things:
First thank's to Harlan for the vids!!!
hyd. roller 422 resleeved block(LS1)
factory front and rear suspension(drag shocks)
LS1 heads
4l60e trans!!!!
300shot No2!
On the last run I was sure we had hurt the engine? and maybe lifted a head or something. It looked like coolant but didn't see that it was still running at the end(you can see on the vid). We trashed the converter and blew lots of oil over the exhaust at the rear from the vent tube <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> . I couldn't believe that we didn't hurt the engine? Never pressurized the coolant system? and no water in the oil, plugs looked fine. I think we will have a closer look before we go out next time to make sure <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
That's all nothing real special but know we are close to the limit of the re-sleeved block! Hope we don't find out how close before next time out <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
First thank's to Harlan for the vids!!!
hyd. roller 422 resleeved block(LS1)
factory front and rear suspension(drag shocks)
LS1 heads
4l60e trans!!!!
300shot No2!
On the last run I was sure we had hurt the engine? and maybe lifted a head or something. It looked like coolant but didn't see that it was still running at the end(you can see on the vid). We trashed the converter and blew lots of oil over the exhaust at the rear from the vent tube <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> . I couldn't believe that we didn't hurt the engine? Never pressurized the coolant system? and no water in the oil, plugs looked fine. I think we will have a closer look before we go out next time to make sure <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
That's all nothing real special but know we are close to the limit of the re-sleeved block! Hope we don't find out how close before next time out <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
#13
Re: Vid's from last weekend: romanss & wade from ARE
No **** <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Guess that'll teach me to listen to the other nick <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Very impressive to say the least, i'm just pissed i missed the 9.25 run. I heard it, and saw the board after the run <img border="0" title="" alt="[Sad]" src="gr_sad.gif" />
No problems on the vid's, It was the least i could do. No car and all <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
harlan, official no car havin' camera ***** <img border="0" alt="[pimp]" title="" src="graemlins/gr_pimp.gif" />
<small>[ May 02, 2002, 07:40 PM: Message edited by: y2khawk ]</small>
Guess that'll teach me to listen to the other nick <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Very impressive to say the least, i'm just pissed i missed the 9.25 run. I heard it, and saw the board after the run <img border="0" title="" alt="[Sad]" src="gr_sad.gif" />
No problems on the vid's, It was the least i could do. No car and all <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
harlan, official no car havin' camera ***** <img border="0" alt="[pimp]" title="" src="graemlins/gr_pimp.gif" />
<small>[ May 02, 2002, 07:40 PM: Message edited by: y2khawk ]</small>
#14
TECH Resident
iTrader: (3)
Re: Vid's from last weekend: romanss & wade from ARE
Thanks again Harlan. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
I also love the angle from the walkway, it's an excellent vantage point, you can see pretty much everything.
PSJ, yup 4.10' with 28w's is correct. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> Why do you ask? Looking for a tire for yourself?
Tom, that ricer is something else. <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> I guess that its the ricer record holder at that track.
See you guys at the track. <img border="0" alt="[Camaro]" title="" src="graemlins/camaro.gif" />
I also love the angle from the walkway, it's an excellent vantage point, you can see pretty much everything.
PSJ, yup 4.10' with 28w's is correct. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> Why do you ask? Looking for a tire for yourself?
Tom, that ricer is something else. <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> I guess that its the ricer record holder at that track.
See you guys at the track. <img border="0" alt="[Camaro]" title="" src="graemlins/camaro.gif" />
#16
Teching In
Join Date: Apr 2002
Location: Louisvile, KY
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: Vid's from last weekend: romanss & wade from ARE
Awesome videos!!!!! I wanted some video of my car but I have only been to the track twice ! I am a rookie <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />
<small>[ May 02, 2002, 10:13 PM: Message edited by: 01Camaro Chick ]</small>
<small>[ May 02, 2002, 10:13 PM: Message edited by: 01Camaro Chick ]</small>
#17
Re: Vid's from last weekend: romanss & wade from ARE
Wow! That car really gets down the track after the 60 ft'. Looking to be the first in the 8's! Congrats and good luck! Hope to see you at the end of the track soon! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
Stephen
ARE/FASTECH 432
www.thebeasst.com
Stephen
ARE/FASTECH 432
www.thebeasst.com
#18
Re: Vid's from last weekend: romanss & wade from ARE
from what Nick said the heads came up on that run
They were hitting it REAL hard on that run, 300 shot rings a bell i think <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
from what i know, it's a big cube solid roller w/ a 4l60. How they got the trans to live is beyond me. Solid rear axle too i think
They were hitting it REAL hard on that run, 300 shot rings a bell i think <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
from what i know, it's a big cube solid roller w/ a 4l60. How they got the trans to live is beyond me. Solid rear axle too i think
#19
Re: Vid's from last weekend: romanss & wade from ARE
Damn those are some sweet vids. <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />
Thanks for taking those vids and hosting them Harlan. <img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" />
Dan
Thanks for taking those vids and hosting them Harlan. <img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" />
Dan
#20
Re: Vid's from last weekend: romanss & wade from ARE
I just hope someone can return the favor when i run my 9 <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
fingers crossed <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />
fingers crossed <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />