View Full Version : what kind of '60 should I expect?


Guffinator
06-24-2002, 12:17 AM
2002 Z28 6speed, 3.42, MTI lid, Nittos...all else stock.

The car hooks great! As a matter of fact it bogs and usually cuts a 2.12 '60. I played with tire pressure, launch at 5k, slip the clutch then floor it. My best launch was a 2.0 and that was no bog and very little tire spin. Is 1st gear extremely high in this car? This has almost proven to me to go to a lower gear such as a 4.10. My best run was a 2.0 '60 and 13.28 @106

Bad Habit Bird
06-24-2002, 12:20 AM
4.10's are a very good mod for a M6 car.

swtvictory
06-24-2002, 01:07 AM
gears are NEEDED for us M6'ers.

I will soon be throwing some 4.30's on. I was originally wanting 4.10's but got a deal on some 4.30s so I jumped on it.

MaxRaceSoftware
06-24-2002, 01:15 AM
60= 2.000-33.906----------------0 to 30 mph=1.659
330= 5.618-65.612----------------0 to 60 mph=4.862
660= 8.600-82.959 to 84.631----0 to 80 mph=7.816
1000= 11.143-97.416---------------0 to 100 mph=11.717
1320= 13.280-105.611 to 103.524-0 to 120 mph=14.991

Ft ET MPH
-1 - .284 0.000 = Rollout ET @ 12 inches
0 .000 4.808 = Rollout MPH @ 12 inches
1 0.170 6.496
2 0.258 8.732
3 0.329 10.296
4 0.392 11.558

Brains
06-24-2002, 09:21 AM
4.10's are the way to go !!! Trust me on this one, Guff... <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> I installed mine last year and never looked back... I made it down to my 7.50 @ 95 MPH before I broke 'em.. Just gotta be careful on sticky tires, because you WILL snap the 10 bolt even with a meager 4500 RPM dump ... Been there done that, got the Moser 12 bolt <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />