ohhiitznik

iTrader: (-1)

Which sponsor on the side will powdercoat wheels for like 25 bucks a wheel?

NOTFAST

iTrader: (10)

id love to find ANYONE that will do it for that low cost

joeformula

iTrader: (11)

You wont find anybody good who powdercoats a wheel for 25 bucks. You get what you pay for.

DopeFedZ

iTrader: (34)

https://ls1tech.com/forums/showthrea...ht=powder+coat

this is a post from a little while back you might want to ask if they are still hooking us up with these prices. scroll down to the bottom he wanted like $15 for a wheel. Prices are cheaper than anywhere else I have ever heard of. I had the center of my weld magnum drags powdercoated black at a shop in Houston and they charged me $95 just for the rears.

a98ws6

iTrader: (48)

Pro Fab Racing! A sponsor------------->>>
They did mine, and they did a good job! I believe they said $15 a wheel, but you might call and ask them. Dont know if every wheel is that much?

NOSjohn

iTrader: (9)

That IS cheap, where are they located?

a98ws6

iTrader: (48)

If I remember its Indiana.

MadIceV8

iTrader: (12)

Wow lowest prices I've ever seen in this area was $75 a wheel which included the sandblasting to get the old crap off and then the new powdercoat.

a98ws6

iTrader: (48)

They sand blasted mine and powdercoated them too!

a98ws6

iTrader: (48)

Here is the link to my wheels I had powdercoated by Pro Fab Racing.

https://ls1tech.com/forums/showthrea...k+powdercoated

I havent had the chance to take pics of the car with the wheels on yet, because the car has no motor, tranny, hood, front bumper,and is up on jacks, so I didnt think they would look to good I did get to bolt one up though and I must say.....

NOTFAST

iTrader: (10)

We need to get pro fab racing into this thread...

BAD ASS TA WS6

iTrader: (5)

Orrrr, you can just call them?

CamaroB4C

Sounds like a good deal to me. It cost me $25 a caliper to have mine done locally. They did one hell of job though. I couldn't imagine how much they would charge me for the wheels, probably cheaper since they don't have to mask wheels as much as a caliper.

Vernon House

We can Do the Small Parts for $7.00 (calipers) if you need price PM me and let me know I have a lot going on right now so I dont get on here as much as I used to or go to www.profabracing.com E mail me @ PAracing50@hotmail.com