Dynamometer Results & Comparisons - What do you guys think?

I just pulled my TR 224/224 cam out of the car and am installing a 244/250 @110 that was a custom grind. Here are my mods and before power numbers. Let me know what you think after results will be before I start tuning on this thing.

Custom 244/250 Camshaft (No PTV issues) :)
Kook 1 7/8" Headers
Custom built 3" Y-Pipe
Rev Springs
Titanium Retainers
Moser 9" w/ 471 Gears

This is on a 2002 Camaro Z-28. I am just curious as to what everyone thinks my car will dyno at cam only. I ran a 11.62 @ 116 with the prior setup and made 398RWHP with the 9".

Thanks,

Amber

What were your numbers with the TR224 through the 9"?

398RWHP with the 9" and 4.30 gears.

what was your tq?

I take it this is Joe's car? I'm gonna take a guess and say 419rwhp. This is Scott Smith with the red camaro, i got it tuned down there awhile ago at your guys place. Good luck with the swap and post your new numbers as i would like to see what the real big cam puts down as i may swap a bigger stick in mine after some more money rolls in. :jest:

405whp...if that.

bigger cam doesnt always mean better peak power.

Well we will see. We made over 405 with the last cam. I will keep you up to date Scott and it was good to here from you. And yes, bigger is not always better, but with the setup I have, bigger will be alot better. I can guarantee this.

If anybody can get the power, ya'll can, 448 says it all, you all cranked it out with my 02 SS, thanks Mike, Joe, Amber and Gang. Scott's dad... keep me posted

What are you doing with the TR224 cam? You selling? Interested

Thanks

Cajun

My guess is around 445RWHP and probably about 390-410RWTQ if everything is setup and tune perfectly.

You didn't mention comp. Heads are stock and untouched?

:cheers: