Best way to flush cooler after trans/verter let go?
07-18-2004, 05:15 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: Hawthorn Woods, IL
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
Best way to flush cooler after trans/verter let go? Well, my trans/converter let go on me. After I took off the converter, HUGE metal chips poured out (not little flakes). Is there a good way I can flush the trans cooler and lines (external b&m style) without removal, or do I have to pull it off?
07-18-2004, 05:23 PM
#2
Moderator
iTrader: (4)
Join Date: Nov 2001
Location: Montgomery, AL
Posts: 2,074
Likes: 0
Received 0 Likes
on
0 Posts
After my converter went bad I flushed my external converter at least 10 times both forward and reverse flow and still had metal flakes. 
Do yourself a favor and just buy a new one. It will be easier, quicker, and you will be sure there are no metal flakes left in it. 
John
Do yourself a favor and just buy a new one. It will be easier, quicker, and you will be sure there are no metal flakes left in it. John