my dyno #s with tsp231/237
07-25-2004, 10:31 PM
#1
Launching!
Thread Starter
iTrader: (27)
Join Date: Jul 2004
Location: Alabama
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
my dyno #s with tsp231/237 Dyno #s are 408hp and 366tq. This was on a dynojet with no airfilter and full belt. It made 404hp and 363tq with filter. I have the dyno sheet scanned on my computer and i tried to upload it using manage attachments but it said file too big. I dont know any other way. If somebody does ill be happy to post it.
07-26-2004, 01:38 AM
#2
TECH Resident
iTrader: (1)
Join Date: Apr 2003
Location: Austin, Tx
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
Nice HP but the the torque is a bit low. Have you tuned it yet? I think a pulley, an LS6 intake and some tuning will bump your numbers up especially the torque. Good luck. I bet this thing is going to haul ***.
Also, with some AFR heads I bet you are over 450 rwhp.
Also, with some AFR heads I bet you are over 450 rwhp.
07-26-2004, 02:37 AM
#3
nice 
. you'll have to resize the graph with PS or MS paint to attach it or host the file and link it.
and bowtieman, the tq numbers look inline with what everyone else puts down cam only with the 231. and he already has an ls6 intake (01) and i'd guess some tuning as well since he lists hptuner in his sig.
. you'll have to resize the graph with PS or MS paint to attach it or host the file and link it.and bowtieman, the tq numbers look inline with what everyone else puts down cam only with the 231. and he already has an ls6 intake (01) and i'd guess some tuning as well since he lists hptuner in his sig.
07-26-2004, 03:38 AM
#4
TECH Resident
iTrader: (1)
Join Date: Apr 2003
Location: Austin, Tx
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
The last few 231/237 cam only cars have made more torque. Your on here a lot more and have seen a lot more dyno's so if you say it inline with other comperable setups I will have to agree with you. Later
