slick98ta

Here it is..
1.53 > 60ft.
11.60 > 1/4 E.T.
115.39 > MPH

And I would like to add,the Hammer C1 cam is the ****!!!
Before the cam I would run 12.2 @109 everyday all day long.So today with the weather being good and a cam change only,I picked up 6 tenths and 6 mph!!
Whatcha think?
And mods are.
Vig. 3200
Airlid w/ K&N
Mac headers
X-pipe w/ bullets
3.73 gears
Ported TB
And a LS6 intake
Newly added "Hammer cam"

Later
MArk

383ss

iTrader: (14)

DAMN nice times!!

Slow Z28

iTrader: (19)

awesome!!!!!!

Chris

Guest

Hey Mark at what rpm are you stalling the car? I Have a pretty close set up as yours and wondering what would be best to stall it at. I haven't taken it to the track yet, but I want to have an idea. Seems like you nailed it right on the head! Nice times......... <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> Here are my mods... I have the t1, MTI s2, 3600vig, all free mods, ls6 intake, ported tb maf,3:73, mac headers, ORP/y pipe...

slick98ta

Well...
Before the cam i was stalling it to 1500rpms and flashing it pretty much and it hooked,getting 1.61 60ft's.
Then after the can I tried the same way and it blew the tires off so I stalled it up higher,up around 1800-2000rpms and thats when it hooked.Don't know why but it did,maybe the cam pulling the upper rpm's through the 60ft mark better.And it felt awsome pullin the left tire a good 5 or so inches off the ground <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

With you having a bit bigger stall i don't know if you can do the same,but good luck <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
My friend has a setup alot like yours and with a 3600 Vig. he was pullin 1.48 60ft and that was also flashing the converter.I guess it just takes practice.Hope this gives you an idea..

mark

badass 2002 z28

iTrader: (5)

coulda went some 11.40's if ya tried harder <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

Stu'sWS6

iTrader: (3)

Congrats on the new best <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

Ragtop 99

iTrader: (7)

Sweeet! <img border="0" alt="[chug]" title="" src="graemlins/gr_chug.gif" />

slick98ta

thanks guys !!

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by badass 2002 z28:
<strong>coulda went some 11.40's if ya tried harder <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Yeah whatever <img border="0" title="" alt="[Roll Eyes]" src="images/icons/rolleyes.gif" />

2000SILVERTA

You got any suspension mods done?

That is a DAMN good 60 ft. IMHO. Best my car has is a 1.59, and I have heads and cam.

DriveATransAm

nice ets man. couple questions- what are the specs on the hammer cam? what size tires do you have and whats the weight of your car. i run very similiar times on a real close setup. i just threw some 3.73s in and im afraid i wont hook up. the best 60' is 1.53 with the 3.23s and a vig 3200. this converter is awesome! i just hope i can hook the 16" et streets.

FASTR A4

Congrats! <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> Awesome times...Man, putting a cam in my car is soooooo tempting!

slick98ta

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">You got any suspension mods done?

That is a DAMN good 60 ft. IMHO. Best my car has is a 1.59, and I have heads and cam.[quote]
I put BMR lower controls arms on.Thats it! <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

[QUOTE]Originally posted by DriveATransAm:
<strong>nice ets man. couple questions- what are the specs on the hammer cam? what size tires do you have and whats the weight of your car. i run very similiar times on a real close setup. i just threw some 3.73s in and im afraid i wont hook up. the best 60' is 1.53 with the 3.23s and a vig 3200. this converter is awesome! i just hope i can hook the 16" et streets.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Cam specs are 222/222 564/564<---I believe thats the lift.With a 112 LSA.

15X8 welds with a 26" 11.5 tire.
and 3360 with out me in it.And about 3560 with me.

<small>[ October 16, 2002, 01:37 AM: Message edited by: slick98ta ]</small>

gator's 99TA

iTrader: (2)

wow! 15x6 welds? those are pretty skinny! not a whole lot of contact patch on the ground. congrats.

Smoke_ur_5.0

iTrader: (2)

Lookin good Mark! Need to get some photos of your car pullin a wheel or two! <img border="0" alt="[Firebird]" title="" src="graemlins/formula.gif" />

badass 2002 z28

iTrader: (5)

i'm sure he meant 15x8