DisturbedOne

Swapping the stock Y pipe on my SS out with an ORY from Stainless performance this Wed. and I was wondering if anyone could give me some insight as to what else I might need to complete the swap.

I've got the pipes, And I know I'll need 02 sims and some RTV.

Am I missing anything?

Would it be worth it to go ahead and swap the manifold flange bolts?

I'm just trying to make sure I'll have everything before we tear into it.

Thanks

badpewter-z

iTrader: (4)

should come with the new ypipe, or new nuts if the manilfold is studed, i dont remeber off hand
you should be all set though

Bad Blu Formula

iTrader: (3)

You're just about set. Be careful with the studs that bolt the y-pipe to the manifolds because they're probably going to be in bad shape. Most likely you're going to break a few, so you might be visiting the exhaust shop.