Post your Best 60' with SY3500
11-06-2002, 01:45 PM
#1
On The Tree
Thread Starter
Join Date: May 2002
Location: Irving, Tx
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Post your Best 60' with SY3500 @ 3500 lbs I went 1.62 on Nittos on motor.
Thanks Jason
<small>[ November 08, 2002, 10:08 AM: Message edited by: JASON ]</small>
Thanks Jason
<small>[ November 08, 2002, 10:08 AM: Message edited by: JASON ]</small>
11-06-2002, 01:50 PM
#2
10 Second Club
iTrader: (3)
Join Date: Dec 2001
Location: St. Charles, MO
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post your Best 60' with SY3500 Bolt on 99 WS6
sy3500, 3.42's, 3550 lbs, nittos
1.65 short time
switched to the st4000---1.54 best on Hoosiers <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
sy3500, 3.42's, 3550 lbs, nittos
1.65 short time
switched to the st4000---1.54 best on Hoosiers <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
11-07-2002, 11:39 AM
#4
TECH Senior Member
Re: Post your Best 60' with SY3500 Internally stock, close to full weight, 3.73 gears, on Nittos I consistantly went 1.71. Even with 3.73 gears it just wasn't a hard enough hitting converter for the tires. Worked GREAT for street races though!
<small>[ November 07, 2002, 11:40 AM: Message edited by: Colonel ]</small>
<small>[ November 07, 2002, 11:40 AM: Message edited by: Colonel ]</small>
11-08-2002, 12:22 AM
#5
9 Second Club
Re: Post your Best 60' with SY3500 Full weight car with spare and jacks.
1.702 on Nittos, 3.23s and stage 2 heads and cam.
1.585 on Mickey Drag Slicks on Convo Pros, 3.73s and stock torque arm. That's spinning with the MTI 422. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Rick
1.702 on Nittos, 3.23s and stage 2 heads and cam.
1.585 on Mickey Drag Slicks on Convo Pros, 3.73s and stock torque arm. That's spinning with the MTI 422. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Rick
