Mustang Style Duals...?
#1
Mustang Style Duals...?
I was wondering if anyone has attempted this yet. Basically it is duals over the axle, with one pipe on each side, not two over one side. I checked out under the car and one 3" pipe will fit over the passenger side, obviously. For the driver side, some stuff will have to be moved to make a little more clearence for the pipe, but doesnt look too hard. Anyone have any thoughts? I would like to attempt this so I can get some more ground clearence. Thanks!
#2
TECH Addict
iTrader: (13)
Join Date: Jan 2004
Location: USN, Haze Grey and Underway
Posts: 2,900
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Ferocity02
I was wondering if anyone has attempted this yet. Basically it is duals over the axle, with one pipe on each side, not two over one side. I checked out under the car and one 3" pipe will fit over the passenger side, obviously. For the driver side, some stuff will have to be moved to make a little more clearence for the pipe, but doesnt look too hard. Anyone have any thoughts? I would like to attempt this so I can get some more ground clearence. Thanks!
#3
TECH Addict
iTrader: (49)
My is wish is for someone to give me access to a lift, a good welder, a mandrel pipe bender and all the pipe I wanted, I'd figure this age old question out. Somebody needs to. I'm sure it could be done with 2 1/2" pipe and the BMR mod. Some guys are doing it by taking the PHB brace completely out, I don't like that mod. Teh !PHBB sucks.