1sicknosws6

i need help! i took the stalk headers out of my car and now i cant seem to put the long tubes in, can someone help?

warmadness

what do u need help with? they slide from the bottom

DD966

iTrader: (3)

Patience. Don't be afraid to move stuff out of the way. It took a mechanic friend of mine (who has done numerous headers) and me, 8+ hours to install mine. It was the most difficult mod I've done.

1sicknosws6

ok i have my car on jacks im trying to get the headers in. i tried to get it in but it wont go in. do i have to unbolt anything els or how high does the car have to be

Hellion

What kind of headers are you installing?

warmadness

the car has to be high as hell,what side r u doing?driver or passager

LS1LT1

iTrader: (16)

The car will likely have to be at least a bit (or a lot) higher than jacks or jack stands will allow.

1sicknosws6

passager side

99'Formula

iTrader: (7)

What kind of headers are u putting in?

LoPeY

iTrader: (6)

The passenger side is usually the easy side. What brand of headers are you trying to put in? Most likely your car isn't high enough. Try to find a way to safely raise your car a bit higher. And maybe you should try unbolting that long heatshield on the passenger side, it'll give you some extra room to get the header in and get the bolt back on as well.

Z-286speed

Take out the sparkplugs. I have pacesetter headers and did not have a problem with the install, had it jacked up about 2 feet. The sparkplugs had to be out for the driver side but not the pass. side.

f-bodman

rally2247

iTrader: (1)

Did you install slip the longtubes from the top or from the bottom??

SeeYaSucker

Most likely isn't high enough, why the hell would you not remove the sparkplug?