01 T/A Dyno Results w/ SLP Lid & SLP MAF
#1
12 Second Club
Thread Starter
iTrader: (4)
Join Date: Aug 2004
Location: Cape Cod, MA
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
01 T/A Dyno Results w/ SLP Lid & SLP MAF
300.26 HP 94.62 degrees Farenheit, 30.03 in-HG, SAE 1.02 3:20 PM
305.86 TQ
How is that for my mods?
I just bought the car 2 weeks ago, had an SLP Lid and MAF already on it. No other mods that I know of.
Thanks for your input!!
Nate
305.86 TQ
How is that for my mods?
I just bought the car 2 weeks ago, had an SLP Lid and MAF already on it. No other mods that I know of.
Thanks for your input!!
Nate
#2
10 Second Club
It's not bad. You can see in my sig what I made bone stock. I think that the MAF may be hurting you some right now. I still have the stock MAF with my current set up. I'm putting 432 hp and 407 tq to the rear wheels.
Enjoy the ride and have fun with it.
Enjoy the ride and have fun with it.
#4
10 Second Club
I don't think that the cooler temps are going to help you out much. Since you don't have the MAF that came with it, I would just start modding with what you have. Getting a good computer tune would help also. If you have any other questions just ask.
Last edited by WS6 #3392; 08-31-2004 at 09:08 AM.
#5
the factory MAF will easily hold 400 rwhp.. i used to have the Pace VV MAF but went back to stock.. but i understand u dont have the stock one lol..
I have a 2001 A4 TA and dynoed 304rwhp 319rwt bone stock with nothing..no lid no nothing with 922 miles on the clock. Check to see if your A/F is in check too.. good luck!
Bobby
I have a 2001 A4 TA and dynoed 304rwhp 319rwt bone stock with nothing..no lid no nothing with 922 miles on the clock. Check to see if your A/F is in check too.. good luck!
Bobby