01SSCloneZ28

iTrader: (1)

well.....this weekend was CERTAINLY a bad *** time for racin! first off, on saturday night....got a hold of me a convertible black 03 cobra....poor old man had no idea what was about to happen! we ran on the feeter roads, and ill give him this much...it was close....but as we were hitting the top end, i just kept pullin and pullin away from him.....then, sunday during the day, i had a pretty decent run with another 03 Mach 1.....THAT was number 6 in the books for rapin a mach whaat? god you gotta love pimp slappin the mustangs huh? just thought i'd share those with yall....GM OWNAGE!

pdd

iTrader: (3)

nice stang kills

WhiteTXMach

I can believe you pulled a stock/lightly modded Mach 1, but I doubt you pulled on an 03 Cobra, especially top end if your only traping 110 (website??? wtf does that mean? Like a 1/4 calculator or something? )

unit213

PM me when you pick up about 300rwhp. Thanks.

| Powered by Satan |

unit213

I'm sure he did. He said an old man was driving. 110mph is stock Cobra range with a very good driver, not some guy out for a leisurely drive.

WhiteTXMach

I figured an A4 LS1 thats not putting to much power to the ground would not pull on the top end against a Cobra. As long as the old man had his foot on the gas and not the brake anyways.

Velocity

With 332/345 rwhp/rwtq and an A4... I would like to know how he is trapping at 110.

I make 345/360 and I trap at 109. I have a 6-speed.

RealQuick

iTrader: (14)

You need the driver's mod or your track conditons/elevation is hurting you. With my little LT1 back when I was making 368rwhp/336rwtq I was trapping 114's with a 3.73 gear.

SouthFL.02.SS

^ The driver mod, lol.

GA_Driver

Yeah, that was ruthless.

01SSCloneZ28

iTrader: (1)

look i know that i pulled that cobra....i wouldnt post bullshit about a stang kill...and for the record, his foot wasnt on the brake.....if yall dont believe my trap times, look at my website...ive got my dyno sheet AND my timeslips posted on page 3 of my site....

King02SS

From what I've seen 6speeds tend to dyno alot higher. So with an a4 and only 10 less rwhp 1mph difference isn't much. BTW good kill on the cobra but never underestimate the stangs.

RED.MACH

I would like a re-match sometime. I got excited when I saw your car and then I got worried when I saw your DR's. I was on my street tires...Nitto 555s.

I gave it a little too much from the line and spun badly. After I hooked I felt as I was actually pulling ( slowly)??? Your SS/Z28 is fast though. Win some lose some.

I figured with your power numbers you would run away from me. You had 2 cars on me with my burnout showcase for the stop n go customers...ha ha

I would like another shot. No flames from me and maybe next time I will have my drag radials on and atleast make it a closer race.

Best qtr. mile times are 12.80 @ 108.5 with DRs with 1.80 60 ft.
dyno before chip was 295 rwhp & 320 rwtq
weight is 3350 w/o me

Keith (2003 red mach 5 sp.)

unit213

I don't doubt either kill or your dyno/track numbers.

Just keep in mind that 110mph traps is not fast.

Good kills.

01SSCloneZ28

iTrader: (1)

another run man? sure i'm down for that. yeah dude i aint got any beef with ya or anything, i like how people can actually talk to eachother like we were doin, i hate ********* that just drive off knowing it was a close ...how about from a stop?...whens good for you? i say we take it to the other end of highway 3 or that street headin to the cinemark.

RED.MACH

cool, we will have to meet up.

Any local meets going on?

Was that Cobra owner an old guy? Bald kinda big? I think I met him, he was bragging about how he loves his car.

1gen

iTrader: (1)

it's funny to see people posting with "0" posts

01SSCloneZ28

iTrader: (1)

umm..not really sure of any car meets around the Clear Lake area....they usually tend to be around westheimer and pasadena.....and the driver of that 03 was kinda big, but he's got gray or white hair i think...he had the mirror cobra stickers, which was kinda trippin me out coz it made it seem as if a cop was behind me when i was following him to the feeter...lol....when do ya wanna make that run? ive got sunday off, and i think im heading down to the westheimer area to grab some grub on friday....gonna keep an eye out for any car meets too....

redsscamaroboy

iTrader: (7)

Put them numbers down with an A4 and you will see 114.
A buddy has, on a Mustang Dyno put those numbers down and posted 12.1 at 114.
Should have got an A4 . Just kidding!
Dave