Damn 4L60E
#1
TECH Apprentice
Thread Starter
Join Date: Apr 2003
Location: Conway, SC
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Damn 4L60E
OK. So my tranny starts slipping a while back (2nd real bad and 4th a little), no big deal, just drive it until it quits. Keep in mind I have a TCI shift kit, TCI billet servo and 4.10 gears. Well, the other day after I slow down for a moron driver, it drops into 1st and never upshifts.
So I buy a rebuild kit w/ Raybestos clutches. The first clutch pack (bellhousing end of tranny) was completely toasted, all black and no friction material left. So I rebuild the tranny, and have it double checked by a tranny shop while I put it back together.
Now I have 2nd and reverse. WTF!?!? I also installed a TCI SF3000 when I had the tranny out. Please tell me whats wrong!
Do I have a shift solenoid gone bad? That is what I am thinking.
Also, can someone please give me step by step instructions for how to hook up a tranny cooler (I got the TCI economy model) for max efficiency. The instructions in the kit are very vague.
THANKS!!!
So I buy a rebuild kit w/ Raybestos clutches. The first clutch pack (bellhousing end of tranny) was completely toasted, all black and no friction material left. So I rebuild the tranny, and have it double checked by a tranny shop while I put it back together.
Now I have 2nd and reverse. WTF!?!? I also installed a TCI SF3000 when I had the tranny out. Please tell me whats wrong!
Do I have a shift solenoid gone bad? That is what I am thinking.
Also, can someone please give me step by step instructions for how to hook up a tranny cooler (I got the TCI economy model) for max efficiency. The instructions in the kit are very vague.
THANKS!!!