LS2 intake ? for sdpc
What is is this tb so saught after ?
10-13-2004, 06:01 AM
#2
TECH Senior Member
iTrader: (1)
Join Date: Nov 2001
Location: Waco, TX
Posts: 6,449
Likes: 0
Received 0 Likes
on
0 Posts
It's $600 cheaper than the LSX and has a 90mm opening. You have to do a little work (fuel rails, extend MAP sensor) to make it work... But that $600 could be the cost of a nitrous kit. 
Mine should be here by Friday.
Mine should be here by Friday.
10-21-2004, 09:41 PM
#7
11 Second Club
iTrader: (1)
Join Date: Sep 2003
Location: Fayettenam, North Cakalki
Posts: 1,252
Likes: 0
Received 0 Likes
on
0 Posts
SCPC is selling all the parts you will need for around $820. That includes a Fast 90mm TB. You will have to Fab up a brackett for the throttle cable.
I hacked up my old ls1 intake and epoxied it to the intake.
I just need the TB now. I am waiting on funds for that.
Brad
I hacked up my old ls1 intake and epoxied it to the intake.
I just need the TB now. I am waiting on funds for that.
Brad
Trending Topics
10-22-2004, 08:42 AM
#11
TECH Senior Member
iTrader: (1)
Join Date: Nov 2001
Location: Waco, TX
Posts: 6,449
Likes: 0
Received 0 Likes
on
0 Posts
The $820 includes the LS2 fuel rails, which price out at about $129 or so. I opted not to go with the fuel rails, since I'll probably upgrade to some billet units anyway. I'm just going to hack my LS1 rails to "get me by" until I'm ready to upgrade the fuel lines & rails.
10-22-2004, 11:26 AM
#13
for 400 bucks and just a little bit of imagination you can have this set up for the same price u can get an ls6 set up. just have the same tb. i have a real good idea on what to do so if someone has an ls2 they can give me some dimensions on i can fab up a trottle body adaptor with a bracket built in. or if anyone wants to let me borrow one so i can do this in the machine shop. this would be a great project for my design class next semester at unc charlotte lol
10-22-2004, 12:48 PM
#15
um, i would but i kinda lost my license haha. let me go home and look at my car and ill try and see what i need measured, shouldnt be much. just like the length and stuff. i seen a link with a whole lot of pics of the intake, does anyone know where that is now i cant find it
10-22-2004, 03:33 PM
#17
ok i need pics of the throttle body region, the length from the front bolts that hold the manifold down to the opening in the manifold where the TB goes, dimensions of the flat spot where the TB bolts up to. are the bottom holes the same as the ls1 tb? hmmm thats all i can think of right now if i think of anythign else ill let you know what im lookin for. ive got the bracket all figured out, it will look factory, when i get it made ill post some pics, as for the adaptor i drew something up but ill have to check all measurements first.
10-22-2004, 04:10 PM
#20
11 Second Club
iTrader: (1)
Join Date: Sep 2003
Location: Fayettenam, North Cakalki
Posts: 1,252
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WS6FirebirdTA00
um, 98-2000 do i need to change the coolant tubes ? looks like it has some clearance
Yes you will need to get rid of the X coolant pipe and get the ls6 style coolant tube for the front and plug the rears.
and those intake ports look nasty, they easy to clean up with a dremil?
Here are som pics of My "Factory Looking" Brackett
