A4 guys with Hypertech Programmer, shift points?
#2
11 Second Club
iTrader: (2)
Join Date: Mar 2002
Location: Hawaii
Posts: 618
Likes: 0
Received 0 Likes
on
0 Posts
To get you started try 1-2 +2 and 2-3 +3. Those were the settings I used for my stock torque converter, stock cam, & 3.42 gears. When I had 2.73s, the settings were slightly different. So you may still need to adjust the settings for your 3.23s. Hope this helps!
Oh yeah, most importantly, WELCOME to the board!
Oh yeah, most importantly, WELCOME to the board!
#3
12 Second Club
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Raleigh, NC
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nuzee
To get you started try 1-2 +2 and 2-3 +3. Those were the settings I used for my stock torque converter, stock cam, & 3.42 gears. When I had 2.73s, the settings were slightly different. So you may still need to adjust the settings for your 3.23s. Hope this helps!
Oh yeah, most importantly, WELCOME to the board!
Oh yeah, most importantly, WELCOME to the board!