Shaner Tb
11-04-2004, 01:08 PM
#2
12 Second Club
Join Date: May 2004
Location: Georgia
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
I have an S3 on my car (01 SS M6)... With lid and loudmouth, my car put down 335 rwhp/345 rwtq.. Dyno after only adding the S3, and put down 343 rwhp/355 rwtq. From comparing graph to another graph there appears to be some decent gains throughout the powerband in addition to the peak gains. Unfortunately, I dont have any track results to compare since those are what really matter, but there were some measurable power gains with the TB.
11-04-2004, 02:25 PM
#4
TECH Senior Member
iTrader: (10)
Join Date: Mar 2003
Location: North Texas
Posts: 8,009
Likes: 0
Received 0 Likes
on
0 Posts
I've started porting throttle bodies on the side for local people who don't want the downtime utilizing cores I've picked up(1-for-1 direct swap, no waiting). Hopefully in the next couple weeks I can get down to Fastech and do a before/after dyno pull for a stock tb vs my ported unit, and will post up results. It will paired to a LS6 intake, as most people that run ported stock tb's run that intake as well. Should have some pics up in the near future of a finished piece.
11-04-2004, 03:56 PM
#5
Staging Lane
Join Date: Oct 2004
Location: Highland Park, IL.
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
I've been researching throttle bodies recently and the Shaner is at the top of my list. He is also coming out with a new billet TB supposed (not ported but brand new) to flow around 100cfm better than a stock one. Supossedly will retail in the low to mid 200s. Not sure if it'll be worth it over a regular ported one though. Only time will tell.
-Steve
-Steve
11-04-2004, 07:55 PM
#6
On The Tree
iTrader: (2)
Join Date: Jan 2004
Location: Virginia Beach, Virginia
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
It's a work of art! But it will take a month to get it back. Have a spare to send and be patient.
www.not-a-sponsor.com
www.not-a-sponsor.com
Last edited by WILWAXU; 11-06-2004 at 07:06 PM.
11-05-2004, 01:10 AM
#7
TECH Resident
iTrader: (3)
Join Date: Sep 2004
Location: Mill Creek, WA
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
I installed the S3 on my M6 WS6 and I love it!! I have pictures right here and when you visit this page check the FAQs section there too.
Shaner ROCKS!!!
Shaner ROCKS!!! Trending Topics
11-05-2004, 09:06 AM
#8
TECH Fanatic
iTrader: (25)
Join Date: Mar 2004
Location: Newark, Tx.
Posts: 1,810
Likes: 0
Received 0 Likes
on
0 Posts
I live about 3 miles from Mark (Shaner). He is a stand up guy and will do everything he can for his customers. I have had one on for about 3 years and its done great. Its just the S2. Now with the turbo I am going to the S3. You wont be dissapointed with his work.
11-05-2004, 01:04 PM
#9
TECH Enthusiast
iTrader: (8)
Join Date: Aug 2004
Location: Pittsburgh
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
I want to send my throttle body out. what's the major differences between the S2 and S3. I do not race and have basically no engine mods, just lid filter and CAI. What's the pricing and turnaround? Can I get a phone #?
12-25-2004, 09:25 AM
#12
TECH Addict
Join Date: Feb 2004
Posts: 2,826
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by badeSST
I emailed him a few times requesting one, but he never emailed me back
