New LS1 Owners - Newbie Tech Basic Technical Questions & Advice
Sponsored by:
Sponsored by:

rip all the wires out!

Thread Tools
 
Search this Thread
 
Old 11-04-2004, 01:07 PM
  #1  
Staging Lane
Thread Starter
 
SERPENT99's Avatar
 
Join Date: Nov 2004
Location: Augusta Georgia
Posts: 50
Likes: 0
Received 0 Likes on 0 Posts
Default rip all the wires out!

I'm gutting a 2002 TA for the track. The owner wants only the lights, signals, horn, wipers and power windows to work. The engine harness is being replaced with a custom accell gen 7 harness.

What forum would be best for wiring questions?

What is the 'integrated body control module" for?

how the F&#* do I get the connector off the cam position sensor, the FAST intake manifold don't leave a whole lot of room to work.

which other little black boxes behind the dashboard can be eliminated.

Do the hideaway headlights use any special controls?

I have all the schematics and I could trace everything out and figure it out but I'll take any help I can get. I just finished a 95 LT1 to 89 IROC swap, I pretty much rewired the whole car. All unused wires are gone and it looks real clean

Thanks for your help.
Old 11-04-2004, 01:14 PM
  #2  
TECH Resident
iTrader: (23)
 
mySStery_machine's Avatar
 
Join Date: Jun 2002
Location: Tri-Cities, WA
Posts: 913
Likes: 0
Received 0 Likes on 0 Posts

Default

Go to the stereo and electronics section for the most info on these questions. Also, look into a member named Whitebird00, here is his profile: https://ls1tech.com/forums/member.php?u=15593 , he has great knowledge. He has worked with these cars for years has all manuals and is very willing to help. Sometimes it may take a bit of time, but the reward is well worth it. Good luck!




All times are GMT -5. The time now is 10:53 PM.