Need 6.0 Cam Help
11-07-2004, 03:18 PM
#1
Staging Lane
Thread Starter
Join Date: Jul 2003
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Need 6.0 Cam Help I need a decent cam for a nitrous 6.0. the bottom end is done and just needing a cam to finish it up. I just need to know a few grinds in some of yall's setup. I want it to be around @.050 234-240 and about 600 lift or better. Anyone offer anything like that? Hydraulic roller
11-07-2004, 10:08 PM
#4
Staging Lane
Thread Starter
Join Date: Jul 2003
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
well they are stock casting ported 241's stock valves. The block is the iron 6.0 .030 over cmpression should be around 11 to 1. Six speed car with 3.42 gear tell me what else you guys need to know. of course the other usual bolt ons and a walbro fuel pump