LS6 valves and 7.4 rods ? ?
11-08-2004, 02:10 PM
#1
On The Tree
Thread Starter
iTrader: (6)
Join Date: Jan 2003
Location: DFW
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
LS6 valves and 7.4 rods ? ? I have done a search on the LS6 valves and learned that quite a few people are stating to go with the 7.35 rods for the longer LS6 valves. In looking at some "package" deals for LS1/LS6 valvetrain upgrades, on some web sites, I'm seeing that it gives the 7.4 rod for both (LS1/LS6).
....what's the deal here ?
Reason for my asking, is that I have stock heads (milled) with the LS6 valves. I have more valvetrain noise than I'm comfortable with and wonder if the 7.35 rods would "help" this situation/issue due to the longer rods.
HELP
....what's the deal here ?
Reason for my asking, is that I have stock heads (milled) with the LS6 valves. I have more valvetrain noise than I'm comfortable with and wonder if the 7.35 rods would "help" this situation/issue due to the longer rods.
HELP
11-08-2004, 06:25 PM
#2
I would think that since the pushrods are longer the valve wouldnt contact the seat (or as hard) as with the 735s making it quieter...
I am running 740s in mine unmilled.
I think since yours are milled theres no question that you should be using the 735s.
I am running 740s in mine unmilled.
I think since yours are milled theres no question that you should be using the 735s.
