408 FMS baby cam new bests
11-08-2004, 02:42 PM
#1
10 Second Club
Thread Starter
iTrader: (14)
Join Date: Mar 2002
Location: Kansas City, KS
Posts: 2,893
Likes: 0
Received 0 Likes
on
0 Posts
408 FMS baby cam new bests still UNTUNED, but ran at thunder this weekend and got some new bests.
1st qualifying pass sunday ran a 10.53 @ 130.49 1.45 60'
cut a 1.42 60' earlier in the day.
DA was around 800.
only have about 300 miles on the motor and 12 or so passes. guessing it has a few more tenths in it.
this was a stock M6 tranny that has over 100 passes on it with 500ish rwhp. and people say the T56's are junk
I'm always about 6 months behind on the M6 record 
1st qualifying pass sunday ran a 10.53 @ 130.49 1.45 60'
cut a 1.42 60' earlier in the day.
DA was around 800.
only have about 300 miles on the motor and 12 or so passes. guessing it has a few more tenths in it.
this was a stock M6 tranny that has over 100 passes on it with 500ish rwhp. and people say the T56's are junk
I'm always about 6 months behind on the M6 record 
11-08-2004, 02:54 PM
#2
Contrats on the new best man. I saw you were up against the stock elem car(daigo) in the next round after our run. OH well..at least you didn't go out first round 
All i know is that on our run both of us blew the tires away(and I seemed to have forgotten where 3rd is..lol)...I hate being first out after a long layoff and they just preped the track Seemed like the manual guys were having problems for a few runs untill the track bite got seasoned in.
anyway..nice meeting you and contrats on the new best.
All i know is that on our run both of us blew the tires away(and I seemed to have forgotten where 3rd is..lol)...I hate being first out after a long layoff and they just preped the track
Seemed like the manual guys were having problems for a few runs untill the track bite got seasoned in. anyway..nice meeting you and contrats on the new best.
11-08-2004, 04:28 PM
#5
On The Tree
Join Date: Mar 2003
Location: Here and there
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 383ss
still UNTUNED, but ran at thunder this weekend and got some new bests.
1st qualifying pass sunday ran a 10.53 @ 130.49 1.45 60'
cut a 1.42 60' earlier in the day.
DA was around 800.
only have about 300 miles on the motor and 12 or so passes. guessing it has a few more tenths in it.
this was a stock M6 tranny that has over 100 passes on it with 500ish rwhp. and people say the T56's are junk I'm always about 6 months behind on the M6 record
1st qualifying pass sunday ran a 10.53 @ 130.49 1.45 60'
cut a 1.42 60' earlier in the day.
DA was around 800.
only have about 300 miles on the motor and 12 or so passes. guessing it has a few more tenths in it.
this was a stock M6 tranny that has over 100 passes on it with 500ish rwhp. and people say the T56's are junk
I'm always about 6 months behind on the M6 record 
Was that N/A or did you spray that run?
Awesome times
11-08-2004, 05:42 PM
#6
10 Second Club
Thread Starter
iTrader: (14)
Join Date: Mar 2002
Location: Kansas City, KS
Posts: 2,893
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 95 Formula
Contrats on the new best man. I saw you were up against the stock elem car(daigo) in the next round after our run. OH well..at least you didn't go out first round
All i know is that on our run both of us blew the tires away(and I seemed to have forgotten where 3rd is..lol)...I hate being first out after a long layoff and they just preped the track Seemed like the manual guys were having problems for a few runs untill the track bite got seasoned in.
anyway..nice meeting you and contrats on the new best.
All i know is that on our run both of us blew the tires away(and I seemed to have forgotten where 3rd is..lol)...I hate being first out after a long layoff and they just preped the track
Seemed like the manual guys were having problems for a few runs untill the track bite got seasoned in. anyway..nice meeting you and contrats on the new best.
nice to meet you too
that stock elim guy WASTED me
he was running a 346 with a .480 lift cam Last edited by 383ss; 11-08-2004 at 05:48 PM.
11-08-2004, 05:45 PM
#7
10 Second Club
Thread Starter
iTrader: (14)
Join Date: Mar 2002
Location: Kansas City, KS
Posts: 2,893
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SPANKY LS1
What do you consider a "baby" cam? What kind of heads? Good runs, Shawn
246/250 .632 111+4 FMS grind 12.5:1 compression
I use a head porter in Wichita KS, they are 5.7L heads milled .030. flow 290's at 550 lift
yes this was NA on 10.5X28" MT 'S' Slicks
1 3/4 dynatechs, open headers, 90MM LSX, TPIS 90mm TB, EWP all the other bolt ons.
Trending Topics
What was your raceweight? Just curious. 
11-08-2004, 08:15 PM
#13
friggin NICE john. now get on AIM some time so i can complain about your front clip being help up with tape! j/k
btw i think he raceweight was whatever the minimum was for the shootout. 3400 lbs or so? if so, that is just incredible at that raceweight.
j/kbtw i think he raceweight was whatever the minimum was for the shootout. 3400 lbs or so? if so, that is just incredible at that raceweight.
Last edited by gator's 99TA; 11-08-2004 at 08:21 PM.
11-08-2004, 08:21 PM
#14
10 Second Club
Thread Starter
iTrader: (14)
Join Date: Mar 2002
Location: Kansas City, KS
Posts: 2,893
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gator's 99TA
friggin NICE john. now get on AIM some time so i can complain about your front clip being help up with tape! j/k
j/k can't get on at the moment Weighed in at 3469 Sunday