Chris@AP-Engineering

iTrader: (-2)

I was just thinking that a fuel injector GP might be a good thing. Anyone interested?? If you are post up or call us!! Let's see what we can do.

Thanks

HumpinSS

iTrader: (1)

what injectors are we talking SVO, Delphi or lucas. I would be interested

WS-6_2002

iTrader: (10)

I might be in for some 50# if the price is right.

Chris@AP-Engineering

iTrader: (-2)

Ok, heres what we have available;

60# siemens (high imp.) injectors - $470 set

55# siemens (high imp.) injectors - $472 set

50# Delphi (high imp.) injectors - $480 set

42# bosch (high imp.) injectors - $354 set

36# Lucas (high imp.) injectors - $296 set

30# Lucas (high imp.) injectors - $296 set

30# Bosch (high imp) injectors - $240 set

Which ones are you guy's interested in??

Thanks

AdamSS

iTrader: (3)

Hmmm...either 42# bosch (aka green-top SVOs) or 36# Lucas
Let us know what can you do for us Chris

1BadMoFo

iTrader: (1)

I'll be needing either 30 or 36 pounders...not sure which...

MTI G1 cam, Stage 2E heads, going in soon, rest of the usual air in/air out stuff...what do you think Chris?

tbojbob

Got the same combo on a stock block, with the intent of sprayin' a little in the future also, IF you think this would over-work the stock 01' injectors, sell me some replacements, on sale of course....

1BadMoFo

iTrader: (1)

yeah, remember mine is a 2000 with the 26# injectors, so I need something for sure...maybe even just the better 28.8's

WS-6_2002

iTrader: (10)

How about you put all on sale? Then people can pick which ones they need.

HumpinSS

iTrader: (1)

30's or 36. can you list the part numbers

Magic Chicken

iTrader: (1)

60's

Maybe you should also list what HP each size is good for, might change some people's minds.

bmfcamaro

iTrader: (1)

i will be around 450 -470 at the rear wheels n/a. should i use 30 or 36lb injectors? how much are either?

Chris@AP-Engineering

iTrader: (-2)

Go with the 36 pounders. In case you ever increase your power level.

AdamSS

iTrader: (3)

So what's the deal Chris ?

Chris@AP-Engineering

iTrader: (-2)

Prices are posted above.

Thanks

Magic Chicken

iTrader: (1)

Are these sets all flow matched? And how long will these prices be good?

Chris@AP-Engineering

iTrader: (-2)

Not all of the injectors are flow matched. The prices will be good until this Friday. Let me know if you have any other questions.

Thanks

AdamSS

iTrader: (3)

Chris, which injectors would you recommend for a H/C car with approx ~420 rwhp, such that the injectors run at 75% of their capacity ? 30 or 36# Lucas ?

Chris@AP-Engineering

iTrader: (-2)

I think that you can probably go with the 36's and be running at just under the 75%. Let me know if I can help you.

Thanks

rod442

Whats the difference between a motoron 60 and a siemens? same thing?