Cartek clutch=BOOM!
#1
11 Second Club
Thread Starter
Cartek clutch=BOOM!
AAAARRRGGGGG
yesterday coming home from work was in 3rd gear not pushing it hard(maybe 1/2 throttle) i hear BOOM clutch peddle kicks my foot. I'm like
The shifter had been kicked out of gear, I was 100 yards from my house (uphill) so i tried getting it in gear to limp it home. No dice, it would not go into any gear. Inspected it today and it looks like it took my tranny with it
Anyone else have any troubles with this clutch ?
yesterday coming home from work was in 3rd gear not pushing it hard(maybe 1/2 throttle) i hear BOOM clutch peddle kicks my foot. I'm like
The shifter had been kicked out of gear, I was 100 yards from my house (uphill) so i tried getting it in gear to limp it home. No dice, it would not go into any gear. Inspected it today and it looks like it took my tranny with it
Anyone else have any troubles with this clutch ?
#5
Originally Posted by jaberwaki
at 4000 rpms flying metal can do alot of damage. i have heard of people losing a foot when the clutch blows apart
-Todd
#7
11 Second Club
Thread Starter
Originally Posted by Gloveperson
Any chance of some pictures of the assembly and the T-56?
-Todd
-Todd
Trending Topics
#8
TECH Enthusiast
Join Date: Apr 2004
Location: Chandler, Arizona
Posts: 749
Likes: 0
Received 0 Likes
on
0 Posts
I"ll be surprised if it took out your Tranny. I've lost some clutches and never done any tranny damage. Hope that's your case once you tear into it. Good luck.
#9
11 Second Club
Thread Starter
My buddy just had his spec 3 clutch explode 1 week before my... when he pulled pulled it apart he had 2 holes in the tranny itself. ! yikes.. i dont have a chance to tear into it will this comming weekend , i will keep you all posted.
#10
TECH Senior Member
iTrader: (1)
Join Date: Nov 2001
Location: Waco, TX
Posts: 6,449
Likes: 0
Received 0 Likes
on
0 Posts
It's happened before with Cartek clutches... I have heard of at least 2 other instances (if you do a search for Cartek exploded in the M6 section). That's why I switched out my Cartek for the Ram (because my car is primarily race - to 7500 RPMs - is very hard on the clutch, and I wanted something that was SFI rated). I sold my Cartek to a buddy for his stock daily driver, and it's still doing fine... but I didn't want to take any chances on it.