ForceFed HP

Stage 2 LS6 Style heads $1499.00 plus shipping(No Core)
Includes

LS6 Style Heads with 59 or 64cc Combustion Chambers
Fully CNC'd
Hand Finished
Bronze Guides
New Hardened Valve Seats Installed
2.02 REV Intake Valves
1.57 REV Exhaust Valves
Patriot Dual Gold LS1 Springs
Titanium Retainers
Super 7 Valve Locks
Hardened Spring Seats
Viton Valve Seals
Flowed with Sheet

Other setups available, call to discuss your goals.


Stage 2 5.3L Heads $1399.00 plus shipping(No Core)
Includes

5.3L Heads 63cc Combustion Chambers
Fully CNC'd
Hand Finished
Bronze Guides
New Hardened Valve Seats Installed
2.02 REV Intake Valves
1.57 REV Exhaust Valves
Patriot Dual Gold LS1 Springs
Titanium Retainers
Super 7 Valve Locks
Hardened Spring Seats
Viton Valve Seals
Flowed with Sheet

All heads will come with new GM head bolts and gaskets!

AdamSS

iTrader: (3)

How long will this special last ? End of next week ?

Edit: Can we see some approximate flow numbers for Stage II 5.3L heads...I did some research and the only ones that were posted were off some 5.7L heads....
Thanks...

AdamSS

iTrader: (3)

Also, per Patriot Performance Gunnar's quote on 11/12/04

"Just get with the guys at FFHP. Brad and Scott will get you fixed up with a pair of our Patriot heads, then they can do the hand finishing work. Give them a call, they are great guys. Patriot Performance and FFHP are a combo that is hard to beat."

Does this mean FFHP heads are PP-assembled Stage II 5.3L heads, hand-finished by you guys ? This would apply double "head work"..... (aka You correcting PP heads)

No flame intended, I just think people need to be informed on those things. $1400 is a lot of $$$

ForceFed HP

the way we get patriot heads is just the cylinder head that has bronze guides that havent been honed and larger valve seats that have not been cut for a valves nor have they been milled. what we then do is hone the guides to spec for valves used, cut out seats and install seats even thought they have new seats already and we use liquid nitrogen to chill the seat and immedietly install the seat so when the seat warms back up it will have a .009-.010 press fit so that seat will never come out unless you want it to. we then cut the seat, blend the seat to the cumbustion camber, bowl hog the valve bowls and seat. after this we begin our hand porting/polishing. so you are correct and incorrect in the statement of us using patriot assembled heads. we are basically using there cnc program. most of our 5.3 and 5.7 heads we sell are done local at total engine airflow then hand finished (at least till they closed doors a few days ago for the move) but we always use patriot ls6 style cores and do the above work to them. this is not something people dont know or something we are trying to hide. if someone is uncomfortable using patriot heads we wont but i have found no reason through our testing that anyone should be uncomfortable with patriot products.

by the way i dont take it as a flame. i am actually glad to see someone doing homework.

thefast1

what are the flow #s and port volumes on the ls6 style heads

ForceFed HP

.100
I 73 cfm
E 65 cfm

.200
143 cfm
125 cfm

.300
204 cfm
165 cfm

.400
249 cfm
200 cfm

.500
286 cfm
224 cfm

.550
296 cfm
226 cfm

.600
310 cfm
234 cfm

intake runner is 234 exhaust runner is 85

Magic Chicken

iTrader: (1)

Anything for 6.0 or larger chamber heads?

ForceFed HP

give us a call we can hook you up!

ForceFed HP

bump.

Timberwolf

iTrader: (8)

if you guys take Amex I'm in for a set for sure.

Also, do you have specials on the "2X" heads too?

ForceFed HP

sale will last until Dec 4th.

ForceFed HP

t.t.t.