ZL1Killa

iTrader: (17)

Ok my car a 2001 trans am ws6 6-speed has dynoed at 356hp and 375tq at the wheels and I want to go with a heads and cam package.

I have been recommended a 224/228 114 lobe separation 4 degree advance and 570-580 lift.

I want 400+ at the wheels along WITH 400+ torque at the wheels, none of this bullshit 450hp and 380tq.

Has anyone accomplished this??? Could you tell me your cam specs if you have?

Turo

iTrader: (23)

i hope you mean 570-580 lift! with good heads and a 224 cam that should be achievable. do a search for 224 cams in the dyno results section and see what the results were with different combos.

ZL1Killa

iTrader: (17)

yeh oops

66deuce

iTrader: (1)

man,that's damn good numbers with just bolt ons.i would think you could easily make your goal with that the cam and heads.

TheBlurLS1

iTrader: (8)

you could make that with a 231/237ish CAM ONLY. why not go with a bit bigger cam if you're going to do heads too?

CaptUSA

iTrader: (5)

What are your drivablity goals? A 222 or 224 cam on a 114 or 115 lsa when used with a decent head should put you right at the power you're looking for and still be Very nice to drive.

Good luck on your decision!!

There is a TON of info on this subject in the archives. A search will yield you much knowledge.