Which Stealth Cam? Heads?
#1
12 Second Club
Thread Starter
iTrader: (2)
Join Date: Jan 2004
Location: Palos Hills, IL
Posts: 3,321
Likes: 0
Received 0 Likes
on
0 Posts
Which Stealth Cam? Heads?
SS1 or SS2 for a full bolton car, auto or manual...will not run nitrous
want it to sound pretty much like stock with Lt's but mayb slgihtly louder. Want to put down best numbers possible have a good low end as well as top end and pull hard all throughout.
What RPM do these max out at? how high should the rev limiter be raised?
What heads should be used with what valvetrain mods?
want it to sound pretty much like stock with Lt's but mayb slgihtly louder. Want to put down best numbers possible have a good low end as well as top end and pull hard all throughout.
What RPM do these max out at? how high should the rev limiter be raised?
What heads should be used with what valvetrain mods?
#3
SN95 Director
iTrader: (16)
Originally Posted by 02WS6Bird
want it to sound pretty much like stock with Lt's but mayb slgihtly louder. Want to put down best numbers possible have a good low end as well as top end and pull hard all throughout.
#4
12 Second Club
Thread Starter
iTrader: (2)
Join Date: Jan 2004
Location: Palos Hills, IL
Posts: 3,321
Likes: 0
Received 0 Likes
on
0 Posts
i've done a search and i havent seen any1 compare the two throughouly enough to get info i need. thats why i ask here. I've been told that the reverse split is ideal fro nitrous but i dont kno much about this part. i've been learning about things other than cams for quite some time
#5
TECH Senior Member
Stealth II here.
404rwhp/383rwtq
Bolt ons, VIG 3200, 3.73 stock rear.
Has to rev at least till 6400 will carry till 6700 or so. I shift at 6600.
I hit the 10's last week with a 2 stage 200 shot dry.
404rwhp/383rwtq
Bolt ons, VIG 3200, 3.73 stock rear.
Has to rev at least till 6400 will carry till 6700 or so. I shift at 6600.
I hit the 10's last week with a 2 stage 200 shot dry.
#6
Teching In
Join Date: Nov 2004
Location: Austin, Texas
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 02WS6Bird
SS1 or SS2 for a full bolton car, auto or manual...will not run nitrous
want it to sound pretty much like stock with Lt's but mayb slgihtly louder. Want to put down best numbers possible have a good low end as well as top end and pull hard all throughout.
What RPM do these max out at? how high should the rev limiter be raised?
What heads should be used with what valvetrain mods?
want it to sound pretty much like stock with Lt's but mayb slgihtly louder. Want to put down best numbers possible have a good low end as well as top end and pull hard all throughout.
What RPM do these max out at? how high should the rev limiter be raised?
What heads should be used with what valvetrain mods?
MTI Stealth-I here...see mods/dyno below....