Wheels & Tires Forged | Billet | Cast | Radials | Slicks

clearence question for WS6

Thread Tools
 
Search this Thread
 
Old 12-19-2004, 09:42 PM
  #1  
Teching In
Thread Starter
 
Corona02WS6's Avatar
 
Join Date: Dec 2004
Location: NOR-CAL
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
Default clearence question for WS6

ok... here's the deal. I will soon have the H&R springs and the Konis SA installed in my 2002 black TA. i was wonderin if 18x10 wheels will fit all around? what size tire should i go with... 285/35/18...? Thanks for your help guys!
Old 12-19-2004, 11:01 PM
  #2  
On The Tree
iTrader: (3)
 
fasthwks's Avatar
 
Join Date: May 2004
Location: columbus,oh
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts

Default

not sure if this helps but I has 18x9.5 on all four corners w/ 285/35/18 with sportline springs and had no issue with clearance.
Old 12-20-2004, 12:18 AM
  #3  
Teching In
Thread Starter
 
Corona02WS6's Avatar
 
Join Date: Dec 2004
Location: NOR-CAL
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
Default

do the tires rub on the wheel wells? how much lower would u say that the sportlines dropped ur car? thanx man
Old 12-20-2004, 08:32 AM
  #4  
TECH Senior Member
iTrader: (2)
 
Xsta Z 28's Avatar
 
Join Date: Feb 2002
Location: Schaumburg, IL
Posts: 12,092
Likes: 0
Received 7 Likes on 7 Posts

Default

With the right offsets they should fit fine.
Old 12-21-2004, 12:58 AM
  #5  
Teching In
Thread Starter
 
Corona02WS6's Avatar
 
Join Date: Dec 2004
Location: NOR-CAL
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
Default

hey fasthwks...how much lower is your car tha stock height... i wanted to use H&R springs and koni's SA and have 18x9.5...285/35/18...do u thinki can do it?




All times are GMT -5. The time now is 04:38 PM.