Corona02WS6

OK...i've done TONS of searching but havent gotten a clear answer...i have H&R springs and Konis SA on my TA and wanted to put in some Z06 replica wheels. People with same or similar setup...what are u guys running...what wheel sizes and tire sizes. what is the biggest u can go with no BFH and that stuff?

Stangkilr

iTrader: (47)

I have the lowest kit you can go...Intrax. Here are some pics of my car with them.
https://ls1tech.com/forums/appearance-detailing/254148-got-new-camera-here-some-pics.html

Xsta Z 28

iTrader: (2)

18"x 9.5" with 275/35ZR18 front.
18" x 10.5" with 295/35ZR18 rear.

My car was lowered 1", sold them to a MadIce with a 2" drop and he had to do less mods than I did.

blaSSt

iTrader: (7)

17x9.5 front and 18x10.5 rear OEM rims. Car is lowered 1.5" all the way around. Nothing done to the front. In the rear, adjustable panhard, BFH mod, 1/8" OEM 3rd gen spacers. No clearance issues, but will hit bumpstops when suspension is fully extended.

ssjunkie

iTrader: (3)

I have the Eibach Pro kit with 9.5'x18's all around. Tires are 275's and I have no problems. I will be going to 285's when these wear out and I expect there will be no problem then either.

1320_PERFORMANCE

Lowered w/ dms springs, front wheels are 18x9.5 53mm offset w/ 275/3518 and rear wheels are 18x10.5 53mm offset w/ 295/35 18...no rubbing issues...wanna take the rear spacers of the back but itll be to low for my true dual set...I kindah like that rake look anyway...

W2WSS

i like the look. cars look great

JacobK

iTrader: (10)

Heres my SS lowered

MadIceV8

iTrader: (12)

Ya all I had to do was the BFH mod (wasen't hard). It only rubbed the size of a dime.