need diagram of th350, line hook up q's
#1
TECH Enthusiast
Thread Starter
Join Date: Jan 2004
Location: Chattanoga TN
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
need diagram of th350, line hook up q's
i need to know what all the hook-ups are on the transmission. i know the speedo and the dipstick and cooler lines, but i have 2 more that i dont know what their function is. if any one knows or has a link to a picture that can tell me i would appreceate it. one has a small screw threaded just barely into it, the other has a small wire coming out of it.
#3
TECH Enthusiast
Thread Starter
Join Date: Jan 2004
Location: Chattanoga TN
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jxaxsxoxn
sounds like a th250C.
You don't want to use that trans, it does look just like the th350.
Is the wire thing on the drivers side and the screw around the cooler lines?
You don't want to use that trans, it does look just like the th350.
Is the wire thing on the drivers side and the screw around the cooler lines?
#4
Banned
iTrader: (2)
Originally Posted by Bandit 1
yeah, i was thinking it was the kickdown linkage since it has a auto/manual valve body 1-2-3/drive shift pattern. its for sure a 350 thoughb, it was ordered by a local speed shop for me, i have the trans dyno sheets and paper work that came with it.
Thats the vacuum modulator, it gets connected to full manifold vacuum.
And the wire thing is not an electrical wire, it's located under the cooler lines and comes through a hole with a bolt next to it?
Thats the kickdown cable. That hole takes a metric bolt BTW.
#5
TECH Enthusiast
Thread Starter
Join Date: Jan 2004
Location: Chattanoga TN
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
i had figured that it was the kickdown line, but fo you have to use this? i wouldnt think that there would be a provision for it on a 95 t/a since its electronic. it was intended for use as a manualy shifted auto, i really diddnt want the dual function valve body, but thats what i got stuck with.