Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

stock head volume cc's

Thread Tools
 
Search this Thread
 
Old 01-07-2005, 09:36 PM
  #1  
TECH Resident
Thread Starter
iTrader: (17)
 
ZL1Killa's Avatar
 
Join Date: Sep 2004
Location: NC - Charlotte area
Posts: 3,747
Likes: 0
Received 0 Likes on 0 Posts

Default stock head volume cc's

I searched for "factory head volume" and stock head volume and stock head cc's and nothing turned up.

I was wondering what the stock head volume cc's was on an LS1 made in 2001. I have a 2001 trans am ws6 6 speed. I'm wanting to know since I'm going to go with heads and cam and i want to know if it will increase my compression or not from going with either the AFR 205's or 225's
Old 01-07-2005, 11:14 PM
  #2  
TECH Fanatic
iTrader: (11)
 
Green Thunder's Avatar
 
Join Date: Apr 2004
Posts: 1,498
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by ZL1Killa
I searched for "factory head volume" and stock head volume and stock head cc's and nothing turned up.

I was wondering what the stock head volume cc's was on an LS1 made in 2001. I have a 2001 trans am ws6 6 speed. I'm wanting to know since I'm going to go with heads and cam and i want to know if it will increase my compression or not from going with either the AFR 205's or 225's
I believe they are:
LS1 66.6
LS6 64.4
6.0 71.0

Thats if I am remembering correctly.
Old 01-07-2005, 11:32 PM
  #3  
9 Second Club
iTrader: (31)
 
tim99ws6's Avatar
 
Join Date: Oct 2002
Location: Nashville, TN
Posts: 3,175
Likes: 0
Received 2 Likes on 2 Posts

Default

https://ls1tech.com/forums/advanced-engineering-tech/111207-ls1-head-combustion-chamber-cc-volume-vs-cr.html
Old 01-08-2005, 12:59 AM
  #4  
TECH Addict
iTrader: (59)
 
Bo White's Avatar
 
Join Date: Oct 2004
Location: Vance, Alabama
Posts: 2,357
Likes: 0
Received 0 Likes on 0 Posts

Default

I cced a set of perimeter bolt 806s one time and got 67cc CC, 198cc IP, and 75cc EP.

Last edited by Bo White; 01-09-2005 at 07:34 PM.
Old 01-09-2005, 04:54 PM
  #5  
TECH Resident
Thread Starter
iTrader: (17)
 
ZL1Killa's Avatar
 
Join Date: Sep 2004
Location: NC - Charlotte area
Posts: 3,747
Likes: 0
Received 0 Likes on 0 Posts

Default

so thats per cylinder right?




All times are GMT -5. The time now is 02:56 AM.