Ignition wires
01-08-2005, 08:55 PM
#3
LS1Tech Administrator
iTrader: (3)
Join Date: Nov 2001
Location: Schiller Park, IL Member: #317
Posts: 32,042
Likes: 0
Received 1,492 Likes
on
1,074 Posts
I wouldn't bother replacing the stock wires unless they are damaged and need to be replaced.
If you do need new wires, I agree than the MSDs are good.
If you do need new wires, I agree than the MSDs are good.
01-08-2005, 09:06 PM
#4
TECH Fanatic
iTrader: (2)
Join Date: Mar 2004
Location: Brownsville, Tx
Posts: 1,460
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RPM WS6
I wouldn't bother replacing the stock wires unless they are damaged and need to be replaced.
01-08-2005, 09:45 PM
#6
10 Second Club
Join Date: Dec 2002
Location: Baton Rouge,LA
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RPM WS6
I wouldn't bother replacing the stock wires unless they are damaged and need to be replaced.
I replaced mine when I rebuilt the motor, because Thunder Racing was having a sale. I put on the Taylors and didnt see any improvements over stock.
01-08-2005, 11:29 PM
#7
Don't expect any perf. difference. But from my experience the taylor wires have stood the test of time. I am running taylor thundervolt 50s right now and have had no trouble with them. With wires this thick (10.4mm) you shouldn't have to worry about any problems, as in the heat.
