firepwr

iTrader: (3)

I'm looking to use my stock rail and mount a regulator up front but I'm looking to find what kind of fitting you guys are using to braze onto the rail. I'm thinking of running a #6 line from the rear up to the rail and connecting with one of the quick connects #6 connectors. And then come back out of the rail with #6 to the regulator and then just send the return back thru my old supply line. Any info would be appreciated and pics even more.

MIGHTYMOUSE

iTrader: (59)

call george at turbotech.. i know he did this for reckless years ago.

koolrayz

iTrader: (26)

Im going to make a new cover that will go in where the dampner cover is out of billet aluminum with a 1/8 npt female thread then hook my regulator off of a short hose and return through the vapor line