Anyone have their TR224 cam card handy?
01-21-2005, 08:11 PM
#1
Teching In
Thread Starter
Join Date: Aug 2004
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Anyone have their TR224 cam card handy? I am working with the local porting shop that did my 5.3L heads on a power falloff issue with my head/cam dyno results. I sent him a copy of the cam card for my TR224, and by his cam simulating software, the power peak is about where it should be by the listed events timing on the card. Which kinda sucks, as it is peaking at about 5800 rpm, and is pretty much through by 6100 or so.
I am wondering if somehow my grind was off in event timing, and need to compare it to someone who has a healthy combination working with the same cam. I'd appreciate it if you can either scan and post your cam card, or email it to me at ian@2cooltek.com
TIA
I am wondering if somehow my grind was off in event timing, and need to compare it to someone who has a healthy combination working with the same cam. I'd appreciate it if you can either scan and post your cam card, or email it to me at ian@2cooltek.com
TIA
