Track times?
01-31-2005, 01:29 PM
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Jul 2004
Location: Palm Harbor, FL
Posts: 1,453
Likes: 0
Received 0 Likes
on
0 Posts
Track times? does anyone have any track times for these new TSP camshafts (torquer, 233/239, etc)? just curious, i have the torquer, but havent been to the track yet
01-31-2005, 05:51 PM
#3
Suspended Sponsor Account
Join Date: Feb 2004
Location: Pewee Valley, KY
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
our Annihilator cam is similar to the 233/239
we ran 11.43 at IRP
check it out here
http://www.ffhp.net/Camaro_Drag_Vid.htm
takes a few seconds to load and starts out a bit out of focus, we are in the left hand lane
we ran 11.43 at IRP
check it out here
http://www.ffhp.net/Camaro_Drag_Vid.htm
takes a few seconds to load and starts out a bit out of focus, we are in the left hand lane
01-31-2005, 09:16 PM
#5
Originally Posted by ForceFed HP
our Annihilator cam is similar to the 233/239
we ran 11.43 at IRP
check it out here
http://www.ffhp.net/Camaro_Drag_Vid.htm
takes a few seconds to load and starts out a bit out of focus, we are in the left hand lane
we ran 11.43 at IRP
check it out here
http://www.ffhp.net/Camaro_Drag_Vid.htm
takes a few seconds to load and starts out a bit out of focus, we are in the left hand lane
why cant i find the specs on any cams on the site?
02-01-2005, 03:57 AM
#6
Suspended Sponsor Account
Join Date: Feb 2004
Location: Pewee Valley, KY
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hugger1975
why cant i find the specs on any cams on the site?
other cams here http://www.ffhp.net/FFHPHeads.htm
02-22-2005, 04:53 PM
#7
Teching In
Join Date: Aug 2004
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ForceFed HP
specs on the Annihilator cam are 232/238 .575/.585 110LSA +2
other cams here http://www.ffhp.net/FFHPHeads.htm
other cams here http://www.ffhp.net/FFHPHeads.htm
Trending Topics
02-22-2005, 06:17 PM
#8
11 Second Club
iTrader: (14)
Join Date: Aug 2003
Location: Kentucky
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
I am going to get 1/8th mile numbers on the 5th, and if all goes well, 1/4 mile times on the 6th with my 233/239...But im getting a set of Heads from ForceFedHP built during that time frame, so, ill be getting numbers with that cam+heads as well 
