screw it... im ordering it!!! side note: cam gurus ever fig. out lobes on 233/239?
02-01-2005, 01:58 AM
#1
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Posts: 1,627
Likes: 0
Received 0 Likes
on
0 Posts
screw it... im ordering it!!! side note: cam gurus ever fig. out lobes on 233/239? after going back and forth on cams ect for a while now ive decided to just put up or shutup...
im not even going to upgrade my stall converter "yet", key word being "yet" for all u guys who are going to tell me im crazy!.. im going to go ahead and get the biggest cam i can and prolly just run 3.73's... i can always swap out tq converters, swapping out cams doesn't sound to much fun! strongly leaning towards the 233/239 by tsp, maybe even the 237/242 if i run a 3500-3800 converter, which i may do..
did anyone ever figure out what lobes it was ground on or how hard it was on the springs compared to like a f14 or 233/233.... jw. also looking at a few other cams such as the magic stick, f9 from futral ect... was wondering if it was ever determined what lobes tsp used ect.
whichever cam i go with, i will launch from 3 grand with teh 3000 stall.. it may not pully real hard right off the line but the 3.73 gear and 150 shot are bound to help it come off the line strong, wish me luck, my next "cam related thread" will hopefully be about the one in my car.
thanks guys.
im not even going to upgrade my stall converter "yet", key word being "yet" for all u guys who are going to tell me im crazy!.. im going to go ahead and get the biggest cam i can and prolly just run 3.73's... i can always swap out tq converters, swapping out cams doesn't sound to much fun! strongly leaning towards the 233/239 by tsp, maybe even the 237/242 if i run a 3500-3800 converter, which i may do..
did anyone ever figure out what lobes it was ground on or how hard it was on the springs compared to like a f14 or 233/233.... jw. also looking at a few other cams such as the magic stick, f9 from futral ect... was wondering if it was ever determined what lobes tsp used ect.
whichever cam i go with, i will launch from 3 grand with teh 3000 stall.. it may not pully real hard right off the line but the 3.73 gear and 150 shot are bound to help it come off the line strong, wish me luck, my next "cam related thread" will hopefully be about the one in my car.
thanks guys.
