TEA heads are back
#1
TEA heads are back
I sent a set of 5.3 TEA heads back to them a while back for freshening. They did new valve job, new like springs and updated the porting to blend the valve job. Got them back yesterday. They have some new art and I was really impressed with the gains.
Old numbers:
.200 -106.4 -135.5
.300 -153.5 -199.3
.400 -200.1 -250.9
.500 -228.5- 287.3
.550 -235.5 -296.0
.600 -240.7 -287.2
.
The after flows are shown on their sheet below:
Old numbers:
.200 -106.4 -135.5
.300 -153.5 -199.3
.400 -200.1 -250.9
.500 -228.5- 287.3
.550 -235.5 -296.0
.600 -240.7 -287.2
.
The after flows are shown on their sheet below:
Last edited by See5; 02-01-2005 at 05:52 PM.
#7
TECH Enthusiast
Join Date: Dec 2004
Location: Chattanooga
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by madpwr1
every head out there now flows 300+ cfm
Last edited by BrentB@TEA; 02-01-2005 at 09:06 PM.
Trending Topics
#13
Launching!
Join Date: Oct 2003
Location: Cary, NC/University Heights, OH
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
Here are my numbers. TEA 5.3 heads, with 2.055" Intake vavle and 1.55" exhaust valve. Intake runner of 218cc and Exhaust runner of 87cc
Lift Intake Exhaust
.1 69.2 50.5
.2 139.3 110.4
.3 204.2 156.6
.4 257.4 225.7
.5 295.0 243.4
.6 315.8 253.5
Lift Intake Exhaust
.1 69.2 50.5
.2 139.3 110.4
.3 204.2 156.6
.4 257.4 225.7
.5 295.0 243.4
.6 315.8 253.5
#14
TECH Resident
iTrader: (2)
Join Date: Nov 2001
Location: Brewster, NY
Posts: 796
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by koolrayz
The AFR stage 3 heads they did for me flowed 337@.600 intake 280@.600 exhaust
The mid flow is the a$$kicker 209@.300, 263@.400 and 303@.500
These heads are going to rock on my new setup
The mid flow is the a$$kicker 209@.300, 263@.400 and 303@.500
These heads are going to rock on my new setup
#15
TECH Enthusiast
Join Date: Dec 2004
Location: Chattanooga
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
its good to be back as sponsors. Its always nice to hear happy customers.
we have gone through a bunch of changes with the move. We had to rebuild our CNC Machine completely. Today they delivered CNC Machine #2 and #3. So we have been a little bit busy. We also have new hours of 8:30 am to 5:00pm.
Now if I could just find time to bring my car up here.
we have gone through a bunch of changes with the move. We had to rebuild our CNC Machine completely. Today they delivered CNC Machine #2 and #3. So we have been a little bit busy. We also have new hours of 8:30 am to 5:00pm.
Now if I could just find time to bring my car up here.
#16
Originally Posted by BrentB@TEA
its good to be back as sponsors. Its always nice to hear happy customers.
we have gone through a bunch of changes with the move. We had to rebuild our CNC Machine completely. Today they delivered CNC Machine #2 and #3. So we have been a little bit busy. We also have new hours of 8:30 am to 5:00pm.
Now if I could just find time to bring my car up here.
we have gone through a bunch of changes with the move. We had to rebuild our CNC Machine completely. Today they delivered CNC Machine #2 and #3. So we have been a little bit busy. We also have new hours of 8:30 am to 5:00pm.
Now if I could just find time to bring my car up here.
#17
TECH Enthusiast
Join Date: Dec 2004
Location: Chattanooga
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by See5
Your business is not easy if you missed that fact. Skilled labor and capital intensive. Throw in your move with it's disruption to work flow, labor and backlog and you've got the perfect storm.
I am very optimistic about where we will be as company in the next 10 years. I am working with some of the most talented people I have ever worked with in the past and all of the changes that have came down the pike are going to lead to a much better product and service in the future.
Congrats again on the flow number Bruce. Those have to be some of the best 2.02 valve heads we have every flowed. Let us know how it goes when installed!
BTW love the mag red.
#18
Possible Scammer - Buyer Beware - Issues Unresolved
iTrader: (8)
Join Date: Apr 2004
Posts: 582
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BrentB@TEA
its good to be back as sponsors. Its always nice to hear happy customers.
we have gone through a bunch of changes with the move. We had to rebuild our CNC Machine completely. Today they delivered CNC Machine #2 and #3. So we have been a little bit busy. We also have new hours of 8:30 am to 5:00pm.
Now if I could just find time to bring my car up here.
we have gone through a bunch of changes with the move. We had to rebuild our CNC Machine completely. Today they delivered CNC Machine #2 and #3. So we have been a little bit busy. We also have new hours of 8:30 am to 5:00pm.
Now if I could just find time to bring my car up here.
doug