Piston to valve clearance
02-03-2005, 01:20 PM
#1
On The Tree
Thread Starter
Join Date: Mar 2003
Location: OKC, OK
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Piston to valve clearance How much do I need?
Looks like I need to mill the heads.
This is what I got.
Hand ported 5.3 Heads with LS6 sodium filled valves (flowed 291 int and 226 ext) These have not been milled at all.
6.0 Liter stock short block. I think it is the LQ4. It has dished pistons. Again the sort block is stock.
GM metal 6.0 liter gaskets.
Cam - 237/242 .603/.609 113LSA
Looks like I need to mill the heads.
This is what I got.
Hand ported 5.3 Heads with LS6 sodium filled valves (flowed 291 int and 226 ext) These have not been milled at all.
6.0 Liter stock short block. I think it is the LQ4. It has dished pistons. Again the sort block is stock.
GM metal 6.0 liter gaskets.
Cam - 237/242 .603/.609 113LSA
02-03-2005, 04:24 PM
#2
10 Second Club
iTrader: (45)
Join Date: Dec 2004
Location: Seabrook, TX
Posts: 1,516
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 98Raptor
How much do I need?
Looks like I need to mill the heads.
This is what I got.
Hand ported 5.3 Heads with LS6 sodium filled valves (flowed 291 int and 226 ext) These have not been milled at all.
6.0 Liter stock short block. I think it is the LQ4. It has dished pistons. Again the sort block is stock.
GM metal 6.0 liter gaskets.
Cam - 237/242 .603/.609 113LSA
Looks like I need to mill the heads.
This is what I got.
Hand ported 5.3 Heads with LS6 sodium filled valves (flowed 291 int and 226 ext) These have not been milled at all.
6.0 Liter stock short block. I think it is the LQ4. It has dished pistons. Again the sort block is stock.
GM metal 6.0 liter gaskets.
Cam - 237/242 .603/.609 113LSA
