Eastern Members - TTP Overstock Sale *All Parts Brand New*

ALL PARTS LISTED ARE BRAND NEW (Unless noted otherwise):

These prices do not include shipping.

All Brand New Components from block to bearings.
Forged 348ci Motor (3.905" Hone) $3000 FIRM (Retails over $4400)
- LS6 Block
- Nitrided Crankshaft
- Lunati Pro-Billet Connecting Rods
- Diamond Flat-Top -2cc Forged Pistons
- Federal Mogul Rod Bearings
- Federal Mogul Main Bearings
- Clevite Cam Bearings
- ARP Main Studs

VFN Lightweight Fiberglass Firebird Dashboard PENDING SALE

Front-Half Wolfe Conversion Kit to Rollcage for 6-Pt Rollbar $250

Window Net Kit for Wolfe Cage $75

Used 2000 PCM: $100

Autotap For PC and Palm Devices: $150

Autometer Sport-Comp Water Temp Guage: $50
Autometer Sport-Comp Oil Pressure Guage: $50

NOS Fuel Pressure Safety Switch $40

Hughes Flexplate (Used for a few dyno runs) to bolt to LS1: $100

MSD Digital Window Switch $75

How long was that tranny in bobs car? may be a good buy if its unused.

100% unused. Never been in the car.

would you be willing to seperate the rear draglites from the e/t drags. i already got tires, so now im looking for wheels to gowith them. and if so, how much would you want for just the wheels. thanks

Just the wheels I'm looking for $300 (Includes centercaps by the way). Rather sell them complete.

100% unused. Never been in the car.

That's correct.. I'll vouch for the parts- those that know me here know I don't buy junk.. all stuff is brand-spankin' new.

:drive:

Hmmmm, I wonder what I could do with that tranny ;)

Hmmmm, I wonder what I could do with that tranny ;)

you could blow a hole in your floor pan :jest:

j/k

i have an idea, turn it sideways and shuv it right up a ceirtain someones :moon:
hit on who, starts with a B ends with a b. lol ;) <<< this little guy makes it ok. :jest:

oh yhea. for what its worth no joking, that trannmy is very good, and the price is good as well.

Pics of the dash board? Also, will that tranny handle 1600 HP?

LINK (http://www.vfnfiberglass.com/9301firebird.htm)

Go down to 93-02 2-piece dash. Thats it. Weighs a whopping 4 lbs.

The tranny I'll have to get further details on actually, I'll let you know.

- Matt

ohhhhhhhhh matt,you have a pm

matt call don and make him buy the kooks for me..thanks

Hmmmm, I wonder what I could do with that tranny ;)

Turn it into a Daisy Cutter and drop it on terrorists!

http://www.4youonline.com/Army/weapons_daisy_cutter.gif

i have an idea, turn it sideways and shuv it right up a ceirtain someones :moon:
hit on who, starts with a B ends with a b. lol ;) <<< this little guy makes it ok. :jest:

:wave-fing: :thefinger :wave-fing:<<< this little guy makes it ok. :jest:

matt what size is the duals

Please post or email pics of red valve covers

thank you
jplatt02@snet.net

Come on guys Lets play nice on here ..

Hey Brad, use some of that extra toy money you have laying around and buy some stuff for me :lol:

None of this'll be around in June when I start making money, I'm sure...

Matt,is the front half kit chrome-moly or mild steel ?

TJ

No money for you!! lol

Hawk: Chromoly.

Matt, is it also jig notched already?

Hawk: Yep.

More info on the tranny please.

Has all the upgraded Hughes parts, transbrake/solenoids/etc. Has the GM reconditioned hard parts. Full manual reverse valve body. Alto red kevlar bands.

They rate this unit for 750 or so. I wouldnt recommend this with your application Mike.

BIG u need a Mikes Ultimate Glide for your car..
There in Cali. and there the best.

BIG u need a Mikes Ultimate Glide for your car..
There in Cali. and there the best.

You are right JS. A glide is what I need.

Hawk: Yep.

Ok Matt, sounds good. Give me a price on shipping to Yorktown, Va 23692

TJ

mike, i run the same tranny, its nice, but for your setup a glide is the way to go.
nice light car with a turbo, that glide will be mint. Huges makes a nice glid too.

This is guy Big,He's the very best trans guy in the Country when it comes to a PRO GLIDE,No one is even close-------->www.mikestransmission.com (http://www.mikestransmission.com/)

I have about 4 or 5 friends all with IHRA TS running these Glides with NO ISSUES..These are guys with 800CI engine that run 200+ MPH cars and make serious TQ

You are right JS. A glide is what I need.
Hughes's Glide is good till 2200HP...With Good convertor think your lookin at about 4G's though :bang: :emb:

Hughes's Glide is good till 2200HP...With Good convertor think your lookin at about 4G's though :bang: :emb:

so he has to have nasa make his seats so that he does not kill him self on the take off, o well, small price to pay for that kind of power :jest:

Sean,Hughes glide is okay but it AINT a Mikes ultimate glide.I'm suprised Kenny hasnt told u about Mikes glide and his propriatery parts or how most hardcore racers in bolth NHRA/IHRA run his box.

MIKES IS BY FAR THE BEST GLIDE ON THE MARKET....PERIOD :D
BIG SHAFT POWERGLIDE
Strongest powerglide ever built, 1.060 diameter input shaft. Able to withstand 1950 ft. lbs. of torque. When installed in the Mike's Transmission powered dragster it powered them to the '98, '99& 2000 Top Eliminator West Championship! These transmissions are custom built to your application.
It features: 1.060 diameter input shaft with turbo spline. (.100 larger than other shafts), Dedenbear case with liner (SFI) and roller extension housing. No external shields needed! Billet short or long shaft carrier with large straight cut gear set in 1.78 ratio with one piece billet steel sun gear and flange, direct drum set up for 9 large heavy duty clutches and steels, instant release high pressure lightweight aluminum pro brake, 2 ring billet servo, kevlar band, deep aluminum pan, large roller thrust bearings, special pump modifications including bolt in forged steel stator tube and steel pump gears plus drum modifications for superior lubrication.
DYNO TESTED!

LIST

RACER NET


MT LTPGBBig Shaft Monster Powerglide $5500.00

$4995.00

Sean,Hughes glide is okay but it AINT a Mikes ultimate glide.I'm suprised Kenny hasnt told u about Mikes glide and his propriatery parts or how most hardcore racers in bolth NHRA/IHRA run his box.

MIKES IS BY FAR THE BEST GLIDE ON THE MARKET....PERIOD :D
BIG SHAFT POWERGLIDE
Strongest powerglide ever built, 1.060 diameter input shaft. Able to withstand 1950 ft. lbs. of torque. When installed in the Mike's Transmission powered dragster it powered them to the '98, '99& 2000 Top Eliminator West Championship! These transmissions are custom built to your application.
It features: 1.060 diameter input shaft with turbo spline. (.100 larger than other shafts), Dedenbear case with liner (SFI) and roller extension housing. No external shields needed! Billet short or long shaft carrier with large straight cut gear set in 1.78 ratio with one piece billet steel sun gear and flange, direct drum set up for 9 large heavy duty clutches and steels, instant release high pressure lightweight aluminum pro brake, 2 ring billet servo, kevlar band, deep aluminum pan, large roller thrust bearings, special pump modifications including bolt in forged steel stator tube and steel pump gears plus drum modifications for superior lubrication.
DYNO TESTED!

LIST

RACER NET


MT LTPGBBig Shaft Monster Powerglide $5500.00

$4995.00




JS, its done already. I spoke to Mike yesterday and paid him in full for one of his Monster glides. I'm staying local for the converter. I'm going to go see Pro Torque here on Long Island. Many people said they are the way to go. :drive:

U wont be sorry Big,Pro T makes a great verter,Barnaby runs them in his Q8 cars with great sucess.

Man is this baby of your gonna be badass :D

Ok Matt, sounds good. Give me a price on shipping to Yorktown, Va 23692

TJ

Matt, I'm still waiting on a price shipped on the chrome-moly front half cage.

TJ

is the speed inc carpet still available? is it the stock style replacement or a "no knockouts" carpet?

later
tim

Yes it is the Speed Inc. Stock style replacement.

t t p

wll those 15x10's fit in the rear wells of my 2001 TA?

Are they new? nevermind *All Parts Brand New*

how much for shipping to 02919

The wheels/tires are sold, sorry.

they gone matt

yep sold.

Is the dash still available?

Mike: Yep. Brand new still in box. Comes with both pieces (Upper and lower). If you are interested, I live about 10 minutes north of you we could meet one day so we don't have to ship it.

Mike: Yep. Brand new still in box. Comes with both pieces (Upper and lower). If you are interested, I live about 10 minutes north of you we could meet one day so we don't have to ship it.


Matt, I want it!

Its yours Mike. Throw me a PM when you get a chance on a good meeting time if you want to go that route. I'll be around Sunday I believe.

t t p

srry to bring up an old post but is the tranny still available?mine just took a dump for the last time and now its time for a real one :devil:

Tranny is sold.

Tranny is sold.
aww...thanx man do u guys sell these brand new? if so could u pm me a price for a hughes 400 with a brake,manual vb with rev. pattern and a 3600ish stall,itll be goin into a 99z thanx alot im shoping around for prices right now :bang:

I am not a dealer with Hughes. You can call them direct for information.

- Matt