chpmnsws6

iTrader: (70)

thats what i get everytime i try to log or read VCM. everything is plugged in. i had to buy a USB adapter to make the cable work with the computer as thats the only kind of port it has. the computer uses windows 98.

another thing that could help- when i plug in the USB cable, "new hardware was found" pops up on the screen. i tried finding something to load it with but have not found anything

i've got a few pictures to show what i'm working with





any suggestions? it was all plugged in and the ignition in the run position... abs inop, service vehicle, SES, and ABS were all shining at me

anyone have any ideas?

chpmnsws6

iTrader: (70)

also, cable is VCM Suite 1.0v, the disk is version 1.2, and i have 1.6 on the computer (its been paid up for updates till june)

white2001formula

iTrader: (5)

You need to make sure that the Comm port # that is in the LS1prog Program. (Settings... in the menu bar) is the same one that is established w/your computer. (Right click my computer and select Manage, then go to device manager and view the ports.)

I had this problem with the USB to serial adapter. PM me if you need more help.

chpmnsws6

iTrader: (70)

it doesn't have a "manage". is it something in the control panel?

AnthonyR

iTrader: (3)

Probably need to load the drivers for that usb to serial cable for win98. Do you have the installation cd for it?

slow

iTrader: (7)

right click on my computer, properties, click on the hardware tap, scroll down to device manager, and then to com port settings. the com port number must be a low number, as many usb devices will get like com 12 where hp is looking for a lower comport.

Ryan

chpmnsws6

iTrader: (70)

which one do i go for?

chpmnsws6

iTrader: (70)

GOT IT! AnthonyR is the man!

now time to start messin with tuners and get it ready for the real tuner to work his magic

AnthonyR

iTrader: (3)

Cool, glad I could help...wait till you get my bill...

chpmnsws6

iTrader: (70)

good thing i didn't send it down to ya!