Blade

iTrader: (1)

Any LS1 F-body owner that has run 12.40 or faster in the 1/4 mile with these mods or LESS, post below.

Mods:
1. Lid
2. Tune, either tuned yourself, or by a pro on a dyno.
3. Underdrive Pulley
4. Gears, 3.73's, 4.10's, 4.30's...etc.
5. Tire, ET streets, Drag Radials, Slicks, etc

12 bolt is fine.

thanks.

ULTIMATEORANGESS

iTrader: (4)

i wonder what started this.

2QuickZ's

Just barely below 12.40 but still...

Mods and time in sig. It was on stock clutch, gear and tune. Car wore E/T Streets on that pass. The dual/dual exhaust is new. That time was on stock exhaust w/ cutout.

JGKadell

iTrader: (4)

I ran 12.26 but I had Mac Headers and a custom tune, adj tq arm, LCA's, lid, K&N, stock 3.23's and a vig 3,200

DMcRacer

iTrader: (2)

12.21@112, thats one tenth and 7mph over stock.

Mods:
1. Lid, MTI($120)
2. Tune, Chris Marsh( )
3. Underdrive Pulley, none
4. Gears, stock 3:23's. But I had a 2600 stall($350)
5. Tire, ET streets, ($200 used)

LS1_PNYTAMR

iTrader: (1)

im hoping for sub 12.40 but i have lid but still with stock filter, 3000 converter, 3.23 gear, mac headers and no tuning.

when i add 3.73 and tuning i hope to see low low 12's

Deafcon

Did you make the thread title exactly the same? I'm poking around over here because I'm looking to do it just to shut him up.

Blade

iTrader: (1)

Yeah, and now that somebody posted a faster time, hopefully he'll shut up about it now.

Saladbar

iTrader: (2)

I ran a 12.36 w/ 315rwhp ... Does that count?

HotRod68Camaro

iTrader: (29)

Times & mods are in sig but its on very shitty street tires. w/ slicks i should be good for close to 12.00! And iv still got 98 heads and stock LS1 intake manifold.

Kyle

WILWAXU

iTrader: (6)

12.67 @ 108.83 (1.88) with a lid, ported MAF and a pulley. On stock GSC's

12.07 @ 111.42 (1.62) with the addition of a Yank converter and tires.

All stock tune & gears.

Mac 2002 SS

iTrader: (6)

mods in sig and without a cut-out . I've been thinking about added a cut-out ,but my SLP Exhaust looks so nice and tight under the car ,I don't have the heart to cut it up.

2001stripper

I have #1 and #5, but I also have headers, ORY-pipe, and exhaust....maybe that makes up for not having #2, #3, and #4.

WJ SOM SS

iTrader: (11)

'02 A4 SS, 3.23's, Vig 3200, 8.5" ET Drags, ASP pulley, Edit tune by Slowhawk, FTRA, stock cast iron exhaust manifolds, cutout. 12.32, 109.6, 1.67 sixties. 60 degree weather and lower temps--all day long....3,550 lbs. WJ

01 B4C

iTrader: (3)

Count me in. Mods are down below and here is a video link with a wheels up shot.
This is a full weight car. Not a stripper.

http://www.supermotors.org/registry/....php?id=180095