Safety Question
02-21-2005, 06:40 PM
#1
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Sep 2003
Location: Fayettenam, North Cakalki
Posts: 1,252
Likes: 0
Received 0 Likes
on
0 Posts
Safety Question For a Manual Tranny car.
If you run an SFI Bell housing. Does the Pressure Plate need to be SFI Approved also?
Thanks!
Brad
If you run an SFI Bell housing. Does the Pressure Plate need to be SFI Approved also?
Thanks!
Brad
02-21-2005, 09:03 PM
#3
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Sep 2003
Location: Fayettenam, North Cakalki
Posts: 1,252
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the link.
So the answer to my Question is Yes I can run a non SFI PP If I am running an SFI Bellhousing
Thanks
Brad
Roll Bar, SFI 16.1 driver-restraint system, SFI 3.2A/1 jacket,
flywheel and clutch meeting SFI Spec 1.1 or 1.2, flywheel shield
meeting SFI Spec 6.1, 6.2, 6.3, or 9.1
flywheel and clutch meeting SFI Spec 1.1 or 1.2, flywheel shield
meeting SFI Spec 6.1, 6.2, 6.3, or 9.1
Thanks
Brad