Anyone switch from race to street wheels------>Lugnuts and Studs????
#1
Anyone switch from race to street wheels------>Lugnuts and Studs????
I have 1/2 studs out back,there long,I have 12X1.5 studs up front,there long too.Now I run welds on the car when I race it but just bought Privats so I'm wonderig if I'm going to have issues with the log studs?It looks like the wheel hole is deep so I can probably get a 1.9in lug nut that will screw all the way down to the bottom and sit flush in the hole but I've been looking at lugs on theses wheels and they look to sit slightly inside the wheel.
Am I going to need stock style or slightly longer studs intead of my long race studs to run both sets of wheels?
Am I going to need stock style or slightly longer studs intead of my long race studs to run both sets of wheels?
Last edited by JS; 03-09-2005 at 01:15 PM.
#2
LS1TECH Sponsor
iTrader: (33)
Join Date: Jul 2002
Location: Out on the farm in Central IL
Posts: 4,399
Likes: 0
Received 0 Likes
on
0 Posts
I have weld pro stars for the track and Konig wheels for the street. I also have the longer ARP studs. Both set of wheels use an open end lug. The Konigs have a center cover that goes over all 5 lugs.