Vehicles Wanted - Looking to buy a fast streetcar.

Looking to buy a fast streetcar.I live in Indiana and am hoping to find something as close to home as possible.Car has to be at least a proven 10 second car with an auto.Don't want a stick car.

Thanks

i've got one here that will go deep into the 10's on motor...can't afford to keep anymore.

http://ls1tech.com/forums/showthread.php?p=2595675#post2595675

Here ya go.
Well guys I was looking to trade the car for a stock 01 or 02 WS6 M6, but that didnt pan out, so I need to sell the car. My wife and I are seperating and I need this car gone. She has the truck and I can no longer use my trailer and therefore my car. The motor, tranny and rear all have 200 or so miles on them since they were assembled at Eastside Performance in Nov.

Here is my sig. It has all the details. The car was done top shelf from day one.

Car- Black 99 FireHawk TA #547,

Darton Wet Sleeve Alum Blk LS1 434 CI
Callies forged 4" LS1 stroker crank.
Absolute Speed LS6 S3 Heads
Comp 248/252 .612 112,
Crane dual Springs,
Kooks Coated 1 7/8 th Headers w/ORY & Corsa Cat back,
TH400 3300stall,
85mm TSP Lid,
Eastside Perf. Oil pump,
Katech timing chain,
Fast 90mm intake and Fast 90mm TB ,
Pace 90mm MAF,
Hal "R" series front shocks & springs Hal 12 way in rear with stock springs
DoubleDiamond SFC welded
BMR Tubular K member
LCA'S,
Torque Arm for TH400
Hotchkiss Adj. PHR,
Strange 12 bolt w/373,
ASP Underdrive pulley,
Wolfe 6 pt weld in Chromoly cage,
KVR's,
Mecham Performance "Titan" Bird on Hood,
Hurst linelock

Car is good for mid 10's in this shape. It is a full weight car. If u wanna do some weight reduction like removing seats or whatnot, it will go low 10s. I had the motor built for juice also. It will hold a 200 shot just fine. I wanted to spray into the nines if possible. The car is on Long Island NY. I am looking for a stock 01' or 02' M6 if possible still to trade, but I cant find one. Then the whole divorce mess is fuckingh things up bigtime. Lemme know. Bear

I am asking $24k but depending on where you are or what you have WE CAN TALK. Let me know. Thanks, Bear

i have a turbocharged 396 lt1 94 z28 for sale . i just listed it . here is the linkhttp://ls1tech.com/forums/showthread.php?t=290525

Thanks for the replies everyone.All the cars sound very nice.Unfortunately I need to find a car a little closer to home.

i can help with shipping...

I'm pretty close- Louisville, Ky

http://ls1tech.com/forums/showthread.php?t=290938

SStolen and crazycamaro496:

Any track time's on your cars??

Thanks

SStolen and crazycamaro496:

Any track time's on your cars??

Thanks

the car has not been to the track yet. by the time it was tuned and running correctly, i didn't have much time left to take it to the track. i figured it was better to wait than to rush things together just to get a few runs. now i'm kicking myself because i don't think i'll be able to keep in long enough to get it there this year...

a good friend has a 383 w/ a 150 in virtually the same car as mine (91 iroc). it made 446rwhp and 555rwtq with the spray on the same dyno, and he runs 10.70's consistently on slicks. the cars weigh about the same, within 40lbs despite the motor difference.

i haven't been in an n/a car that pulls as hard as this. the power numbers show that it's good for 10's and i think on a 150 it's easily into the 9's. i just posted the dyno sheet in my thread if you want to take a look..

My bro's car run's 9.30's and is the badbluess which is for sale in this section, it is a 99 SS camaro.. A easy 8 sec car but just needs street tires..

BADZ:

Where's your brother located??

Houston Tx.

Still lookin.

No Interest in my FireHawk???

Here's one for ya and near the KC area... http://www.ls1tech.com/forums/showthread.php?t=298186&page=1&pp=20

how bout a street suv isnt into the tens but runs very well the same. 93 typhoon.

Still lookin.

how about either of my cars for sale? 2000 Z28 or 2003 Cobra, both have run 10s? I'd be willing to deliver it and fly back for a little money.

http://www.ls1tech.com/forums/showthread.php?t=328307

i have a 1963 chevy nova that has a built motor in it brand new everything put lots of money into it im selling it for 9 lostoceanz63@aol.com

spuncobra something something....still wanna trade?

I Have A Turbochaged 396 Lt1 For Sale And I Am In Central Kentucky .

spun03cobra:

You live a little too far away from me.Very nice cars though.

camarosf:

You have a PM.

I have a 8 sec. blown big block street truck in Michigan for sale. I drive it on the streets quite a bit. Pump gas. street tires. mufflers 8 seconds.

http://www.ls1tech.com/forums/showthread.php?t=332695

imos-ss 01:

Nice car but too far away and a little out of my price range.Anybody close to Indiana???

mine isn't close and when the new forged bottom end goes in, will run mid 10's easy. my car makes a nice showcar too.

went 11.2 last time i took her out shifting at 6k.

Here is my Hawk. I am in Detroit. Doesn't run 10's, but with a power adder it will. It is traps 110-113, but due to my poor driving skills the best time on it is a 12.86 with a 2.2 60' on street tires.

http://www.ls1tech.com/forums/showthread.php?t=338562

-Geoff

mine's getting a new forged bottom end with a nice cam, will be done in a little over a month, not sure if I'd want to sell her now, lol. she's gonna make 550-575 to the tire easy.. :)

Its a 98 Red Formula with a WS6 hood.

ENGINE MODIFICATIONS:
6.0L (LQ4) iron block with standard 4-inch bore (364cid)
Wiseco forged pistons with 2cc valve reliefs
Eagle H-Beam rods with floating .927 wrist pins and ARP bolts
Absolute Speed 5.3L (706 castings) Stage 2 Cylinder Heads
ARP Head Studs
Comp Cam (232/234 .595/.598 112lsa)
Stock 5.7L Crankshaft (balanced by Kammer & Kammer - Huber Heights, Ohio)
Clevite 77 Bearings
Pacesetter Long Tube Headers
Dynomax Bullets with turn downs
POWER ADDER:

TNT Force 2 nitrous kit
Custom nitrous purges through the Ram Air nostrils
DRIVETRAIN/SUSPENSION MODIFICATIONS:

TH400 with reverse manual valve body
Moser 12-Bolt with 3.73 gears
BMR Extreme Duty Drag Race Rear Sway Bar
G2 Tubular Lower Control Arms
G2 Sub Frame Connectors
Spohn Adjustable Torque Arm with Driveshaft Loop
G2 Adjustable Panhard Bar
MISCELLANEOUS MODIFICATIONS:

Wolfe Race Craft 6-point roll bar
Hurst Roll Control Line Lock
Hawker Genesis Light Weight Battery
Hood pins
Following items removed: A/C, Heater Box, Cruise Control, ABS, factory overflow bottle, washer resevoir, hood latch, hood baffles, ducting behind dash, heat shields, front & rear bumper supports, power steering, ....
Factory PCM relocated to inside of firewall; all wiring under hood redone and relocated under fenders
Engine bay detailed for "old school" look; flat black bay; painted block, etc
Autometer Sport Comp 5-inch Tach with Shift Light, Fuel Pressure Gauge, N2O Pressure Gauge

Since I have had the car I have added QA1 double adjustiable coilovers in the front and single adjustiable QA1 shock in the rear, a TCI Ultimate Street Fighter 3700 stall, New Weld Draglight rears 15x10 and 275/60/15 MT that haven't had a pass on the new tires.

10.4@132 on a 150 shot and 11.1@121 on motor. Both runs on drag radials and pump gas.

b18c1hybrid:

You have mail.

http://cgi.ebay.com/ebaymotors/ws/e...TRK%3AMESE%3AIT

http://ls1tech.com/forums/showthread.php?t=275730

read through entire thread.. or just read the ebay one. pm me please..

I have an '88 Mustang for sale. Turbo Buick 3.8 motor, fully built motor/trans/rear end. NASTY street car. throws 9.8's on high boost.

To the top

Check out my ad titled 9-Sec Camaro Pace Car.
I'm located in the Western suburbs of Chicago.
Let me know what you think.

99 SS T-top, 6 speed ebony leather, trans am door panels, Mcleod clutch, running on 315 Nitto Dr's right now

Motor: 6.0 Iron block bored .040 over, line honed with torque plates,
decked, clearenced, a lot of time involved in assembly
Lunati Pro series Crank #JO711ER 4340 Forged Steel Reluctor ring installed
Lunati Rods #LTE9 BILLET 6.125
Diamond Custom Nitrous -6cc Pistons
Dianond PRO-SELECT RINGS / H13 tool steel pins
ARP Head studs/rod bolts/main caps, o ringed
Big FMS custom Cam 247/253 .627/.642 112LSA
Comp adjustible timing chain/ ARP Crank bolt

Tranny: Mcleod single disk, 10K miles upgraded D&D performance T56 tranny with steel shift fork etc.

THis motor can take upwards of a 400 shot, if you can hook it up with the right tire. :)

Forgot to mention this car has a custom paint job, pepper gray metallic, with a black SS hood scoop, 4 layers of clear, 7K paint job.


Makes 550rwhp 535twq NA on pump gas and is waiting for a big shot of gas... an awesome daily driver :)

Willing to let it all go for 21K, PM me if you are interested in dealing.

AINTNO8:

Very nice car but out of my price range.Man you sure go through some cars don't you. All of them seem top notch also.Where in the heck do you find them at and why do you keep selling them?? You had a few Buicks I would have loved to have.Especially the blue T-Type.

BIGSS99:

Should have said so in my post but I am looking for an auto.

Thanks

To the top

To the top

Im selling my Z28, Its an 02 with 33k miles, still on stock headers, stock cam, stock heads, stock rims, and a MILD tune, and Ive pulled 11.1 at 122 with a 150 shot. Do one of many mods and you should be in the 10s. Asking 18.5k. Ill post a link in a sec.

Here you go, Also it looks almost Bone stock on the outside, Nitrous system is totaly hidden under the hood.

http://ls1tech.com/forums/showthread.php?t=352328

Still looking.

To The Top

I'm 10 minutes from South Bend Indiana. Let me know if your interested.

10 second TA (http://www.highperformancepontiac.com/features/0310pon_99ta/)

Run's consistant 10.50's

Still looking

To the top

To the top

I'm 10 minutes from South Bend Indiana. Let me know if your interested.

10 second TA (http://www.highperformancepontiac.com/features/0310pon_99ta/)

Run's consistant 10.50's

How much are you looking to get for your car??? Bad ASS looking car BTW/

are you looking for someone to sell their 9-second street car that still gets 25mpg and is selling it for $5k?

there is 20 cars in here if there is one, all with different pros and cons, and you STILL cant find soemthing?

IlEagle :

I don't exactly know what your talking about or who your talking to but I have more than $5k to spend.I sure hope your not wasting your time worrying about what I'm doing.Maybe your just upset because I didn't want your Mustang.Thanks alot for your witty post though. :-)

No hard feelings. I dont know you and you dont know me, but for everyone elses sake showing u everything they have i hope you are serious about being in the market.

You see kids looking wasting people's time every day, and it gets repetetive.

That's very true,you don't know me and I don't know you.I can tell you one thing for sure,I am not a kid.I have made a few people offers on here so at least they know I am serious.And once again I question you.Why are you so worried about everyone else's sake like you posted??? Seems to me like you have too much time on your hands or maybe your just bored.Tell ya what.Since you know what my post is about I suggest you not clicking on it anymore.That way it won't keep you up at night.

Oh,no hard feelings here either.

To the top.

dosnt fit all your requirements but i figured id tell ya abotu this car anyways.
i have a mint 94 z28 with a very nice 400ci solid roller, with afr 215RR heads, custom turbo setup, all sorts of other custom stuff and goodies. 88mm turbo setup thats beign fabed for it. it will put down well over 1000rwhp easy. and be daily drivable. it has a very custom t56 in it though. price would be around 30k.
most everythign is brand new never been started.
i was gonna put her togeather and go for the worlds fastest t56 f body record.
you could lighten the car and put an auto in it and run an 8 easy

brook

Brook:

Sounds like a killer car.To be honest $30k is too much for me to spend right now.Good luck on the build.I would like hear how things turn out when it's completed.

Why Dont You Pm Me A Offer For My Car Like I Said A Simple Exhaust And You Got Mid To Bottom 9 Second STREET Car.

I Just Got A Price For Shipping Which Im Willing To Help Out On.
Its Safe And Quick.

You've got a PM.

Here ya go.
Well guys I was looking to trade the car for a stock 01 or 02 WS6 M6, but that didnt pan out, so I need to sell the car. My wife and I are seperating and I need this car gone. She has the truck and I can no longer use my trailer and therefore my car. The motor, tranny and rear all have 200 or so miles on them since they were assembled at Eastside Performance in Nov.

Here is my sig. It has all the details. The car was done top shelf from day one.

Car- Black 99 FireHawk TA #547,

Darton Wet Sleeve Alum Blk LS1 434 CI
Callies forged 4" LS1 stroker crank.
Absolute Speed LS6 S3 Heads
Comp 248/252 .612 112,
Crane dual Springs,
Kooks Coated 1 7/8 th Headers w/ORY & Corsa Cat back,
TH400 3300stall,
85mm TSP Lid,
Eastside Perf. Oil pump,
Katech timing chain,
Fast 90mm intake and Fast 90mm TB ,
Pace 90mm MAF,
Hal "R" series front shocks & springs Hal 12 way in rear with stock springs
DoubleDiamond SFC welded
BMR Tubular K member
LCA'S,
Torque Arm for TH400
Hotchkiss Adj. PHR,
Strange 12 bolt w/373,
ASP Underdrive pulley,
Wolfe 6 pt weld in Chromoly cage,
KVR's,
Mecham Performance "Titan" Bird on Hood,
Hurst linelock

Car is good for mid 10's in this shape. It is a full weight car. If u wanna do some weight reduction like removing seats or whatnot, it will go low 10s. I had the motor built for juice also. It will hold a 200 shot just fine. I wanted to spray into the nines if possible. The car is on Long Island NY. I am looking for a stock 01' or 02' M6 if possible still to trade, but I cant find one. Then the whole divorce mess is fuckingh things up bigtime. Lemme know. Bear

I am asking $24k but depending on where you are or what you have WE CAN TALK. Let me know. Thanks, Bear


If this car is available when I get back from Iraq I will be ALL OVER IT!!! :hump:

What is your range 11second, that would help.

To the top

To the top

you got a pm

craparo:

Nice car but California is way too far for me to travel.

To the top.

To the top

buy a 98 for cheap and build it up yourself

http://www.ls1tech.com/forums/showthread.php?t=372960

Can't get a better deal than that, IMO.

CANNIBAL:

Nice car.Too bad's its a stick.I am looking for an auto.

Thanks

you still never bought a car yet???? after the many offered to you!!

Sellin my 96 T/A runs 11.12 @ 123.72 vid link in the 11 sec section asking 7.5k, located in South Texas

pics and info here:
http://ls1tech.com/forums/showthread.php?t=368733

9secpacecar:

Evidently I haven't bought one yet since I am still looking.How about yourself??


Weapon X:

Nice car and good price but Texas is too far for me to travel.

To the top

this guys prolly just breaking balls. anyone who was really looking for something and had the cash woulda found something by now either on autotrader or ebay, or one of the cars posted here. or he woulda built his own car.

ZeroFear:

Glad you are so worried about me buying a car.Are you really that bored on a Saturday night that you have nothing better to do than jump on my post?? Tell you what you find me a car or better yet build a car and then I will buy it from you.Better forget what I just typed because after searching most of your posts looks like all you do is ask questions anyway.

To the top.........

To the top........

I thought I'd share, I'm in the exact same position as 11secV6 here. I just sold my near stock '01 SS to buy a built streetcar and haven't found anything that's reasonably priced AND has what I want (and I'm considering A4 or M6). I had my head up my rear about buying a stick only, but if an ideal-to-me auto shows up, I'll hand over my money.

ttt again for ya.....

Thanks for the bump. :-)

To the top.........

To the top.........

http://www.ls1tech.com/forums/showthread.php?t=403692

slow14U:

Nice car and price but I gotta find something close to home.

Thanks anyway and good luck on your sale.

To the top.........

elevensecondv6: Have you considered traveling further?? I know from my perspective, when the right car shows itself, I'll go through hell and high water to get her (or get her to me). I'm currently on the lookout for a 01-02 black/black WS6 in the <14k range. If the car is a LONG way away from me, then that is less I have to spend on the car, and more on shipping or plane tickets/gas/food/hotels to go get her.

ttt for your valiant search... g/l with it!

WarBird69:

Yeah I was just trying to find one kinda close to home so I could spend more on the car instead of shipping it or buying a plane ticket to go look at something.I am sure something will come along sooner or later.Looks like later in my case. :-)

HI! elevensecondv6, check out Indy Pace car, on this site ,11/16/05 it is a street car. thanks RON

To the top.......

To the top.......

i have a 98 auto with fresh engine , eagle H beam rods, je pistons , ported stock heads, tr224 cam, pacesetter long tubes,ls6 intake with 80mm bbk throttle body , carbon fiber lid , new vig 3500 conv. much more
body has a little over 100,000 miles , drivetrain has less than 4000
i would sell for around 9000

How fast has the car been at the track???

car has not been raced yet , the race tracks dont open for another month . it will be an easy 11 sec car . and it is built for nitrous which i have ordered .

To the top.......

To the top.......

Bump..

to far to travel but you have no location listed in your info, where are you?

I have an 87 GN. 10 sec car when tore down. Most of the parts there to get it together again. Should be low 9s high tens when back together. 18,000, you finish.

BTW, Im in Lex KY. The car will be in Jeffersonville IIN next month for the FAST setup to be installed...20,000 after that.

Not to just flame this thread, but also a free bump. I have seen many a fast car for sale on this great forum and I cannot believe that you are still looking. Good luck with the search..........

99blancoSS:

It say's right in my first post that I am located in Indiana.

Thanks

To the top....

Ah well I'll sell you mine but it wont be cheap. Its a very fast street car. Check out my sig. But your looking at 35k before Fikse's 39k after. Look at my sig. This car has been sound deadened as well as having a high SQ audio system. The entire interior had been taken out for the 3 step process and to wire the audio. Tires are almost new right now as well. Just turn 80k. Perfect running condition. You dont need to use the n2o but its there just in case. Is the car over priced? maybe a little, but it is a very fast very dependable dd and I'll deliver it. There are faster cars here but do they have the whole package? This car will handle, set you back in your seat, and deliver music like you've never heard before.

To the top....

To the top....

If your still looking I have a 98 WS6 runs 10.4 w nitrous and 10.9 w/o nitrous its on Ebay Item number: 4635994116 the 17,000 cash will take it

Tensecta:

I like it.

So is it sold Jeff????

Still looking.

So is it sold Jeff????

Sorry, back for sale

Wish we could make a deal.

To the top.......

To the top.......

Kev,

Did you want to take my offer or no? I said I would bring the car to Indiana tomorrow. Car has to go. Let me know.

You have a PM

pm sent

PM replied to.

Still looking

My car is for sale and it is a manual tranny. For the price, you could easily do an A4 swap and get your 10 second pass with an automatic.

http://www.ls1tech.com/forums/showthread.php?t=520261

i sent you a PM about my grand national for sale

JohnnyZ28:

Don't want to mess with changing a car over from a stick to an auto.

ws6jesse:

I am looking for a proven car with time slips.If I remember right you haven't had your car to the track yet.Sounds like a nice car though.

Looking to buy a fast streetcar.I live in Indiana and am hoping to find something as close to home as possible.Car has to be at least a 10 second car with an auto.Don't want a stick car.

Thanks

originally posted 3-15-05

what are you looking for that you have been unable to find in over a year???

Wish we could make a deal.

Still have my car took it to the track last Wednesday..... running great

How did things go at the track Jeff???

I sell you mine and deliver it to Indiana

How did things go at the track Jeff???

The track wasnt the greatest not much traction I was only getting 1.5-6 60ft. instead of my normal 1.3-4 and I was still running 10.6's at 127-129 mph. it runs the best at Norwalk thats one of the best tracks in the country NHRA race there on TV thats where I get my good 60 ft. I think I can run a 10.2-3 here pretty soon weeeeeeeeee. :) Lol I saw u had or have a Viper?? That thing is bad asss good luck with the sale on that if its not already.

Jeff

Chopstix:

How fast has your car went at the track???

Looking to buy a fast streetcar.I live in Indiana and am hoping to find something as close to home as possible.Car has to be at least a 10 second car with an auto.Don't want a stick car.

Thanks


i have an 04 civic :jest:

Too much power for me.

Chopstix:

How fast has your car went at the track???
11.6 @ 119 NA on 28" slicks
10.9's @ 126 with traction issues on launch (100 shot)
cut 1.5's NA and 1.6's on spray

Have added QA1's up front
Progressive Nitrous controller (2-250 shot)
Weight reduction and Larger Cam

Car should be back to the track in a couple weeks

The car will now run bottom 11's high 10's NA
and shooting for high 9's on spray

have driven the car 20 miles one way in rush hour multiple times...and have driven the car 80 miles to the track and driven it home.

Too much power for me.

WOuld my ble and red 94 Sunbird work for you? :jest:

No way Juiced.I don't want to have to get my TOP FUEL license.

Let me know what the car runs when you go back.And a price please.

No way Juiced.I don't want to have to get my TOP FUEL license.

:bang:

Let me know what the car runs when you go back.And a price please.

the car will run fast and my price is not cheap..... :jest:

Keep me posted.

show me the $$$

Kinda hard to put a price on a car I don't own.

To the top

To the top

Bump.......

1999 T/A w/ Strange 12-bolt (3.73's) ... full array of aftermarket suspension parts. Forged (Mahle power pak) with AFR205's and Mamo spec cam. FLT 4L65E Level 5 with Yank SS360 T/C ... PCT driveshaft and all the boltons. 52,000 on the car itself, 5,500 on the motor, 3,200 on the transmission and PCT 3 1/2" alum driveshaft and 2,500 on the 12-bolt. Built for serious power and low-end torque. Oh yeah ... and it has 17" asf black-chrome wheels with new Goodyear Eagle F1 GS-D3 tires on the back ... fairly new GS-D2's on the front runners. ... and 30" SVO injectors with RACETRONIX electric fuel pump ... Mezziere water pump ... and tons more stuff including true duals and Heavy Duty Bilstein shocks on all 4 corners.

I have all receipts of all parts and work...all performed by Next Level Performance in Altamonte Springs, Florida.... over $15,000 on the motor, over $4,300 for the tranny with T/C, and over $3,200 for the rearend work. Total is over $30,000 in parts and labor and I think the car is worth over $13,000+retail by Kelly Blue Book. There's more.
Built it for street and strip use but never took it to a track. The ringlands were were set up for a 150-200 nitrous setup but I never had the money to follow through with that.

$23,500 FIRM.

The facts... car in MD, negotiable...

To the top.......

I might sell my 97 z28 396 A4. I'd take 17K, motor has about 5k on it trans about 2.5 K. Went 11.68 N/A and 10.86 on a 75 shot. Car was built to run a 250 shot. Has a fjo N20 controller. I'd work out a deal to get the car up to you. For full detail send a PM.

Bump....

Bump.....

http://www.ls1tech.com/forums/showthread.php?t=697254 pm me if interested

Sounds like too much work to make it a street car.

Thanks anyway.

Bump.......

Ok car is re-painted and done. You want a seriously fast car that is built from top to bottom without compromise your going to pay for it. I'll sell my car for 40k. You cant duplicate it for less.

Sorry I don't have that much to spend on a toy right now.Sounds like a nice car though.

I have the car in my sig. Took it to the track last weekend and made the first pass in it since the changes. It ran a 6.99 with a 1.48 60ft and pulled the wheels about 6 inches on foot brake. The car has alot more in it. Street legal. I would let it go for 10.5k. I am in Western TN. it has many new parts.

TN94Z:

Can you PM me your number??

Thanks

pm sent

http://www.cardomain.com/ride/753933

tried to send you a pm but inbox was full, ill give you a call, dwayne

Inbox has been cleaned out.Please try again.

Thanks

still looking for a car??????

new times
10.4 on a 150 shot
11.3 NA

adding a dedicated and tubular K-Member and A-arms next weekend

$15,000obo

Bump.......

Still got my car. Ran a 6.99 with the wheels knee high on the first time out.

Still got my car. Ran a 6.99 with the wheels knee high on the first time out.


Is your car streetable???

Yep. It doesn't have ac, radio, etc...right now, but it is streetable. You might want to swap to a smaller converter like a 4k or something. It has a cage and stuff, but it has to be street legal to race in the class I race in. It depends on what you call "streetable."

I've got a 94 Z28 with TH400 tranny and the car only has 37000 miles on it. It made 649 to the wheels before we did a custom aftercooler install. With a little more tuning and some ice in the tank it could easly make 700rwhp. Car has always been keep in a garage and is located in charlotte, nc. Pm for more details or pics.

You both have PM's.

Thanks

Bump....

i have a 98 camaro with a new 408 and brand new th-350 and 4400 stall and lots of extras pm me if interested

You have a PM.

Bump.....

I called and left ya a message last night about the car. Let me know if your still interested

Heck didn't check my cell today.I will give you a call tonight if you left your number.

http://www.ls1tech.com/forums/showthread.php?p=7237324#post7237324

make an offer

Just looking at the first thread. This thing is 2 years and a few months old......found anything yet?

http://www.ls1tech.com/forums/showthread.php?p=7237324#post7237324

make an offer

Sorry.lookin for a turnkey car.

http://www.ls1tech.com/forums/showthread.php?t=732089

make me an offer I cant refuse. mine went 10's with 18" wheels up front and lowered.

show n go. :cool:

http://www.ls1tech.com/forums/showthread.php?t=732089


Sorry,like my post says,"no stick cars".

Thanks anyway.

How about a 83 malibu wagon with a ls1, i could put a cam and bottle in it and go mid 10s. Lots of good parts.

Just looking at the first thread. This thing is 2 years and a few months old......found anything yet?


I don't think he has any money to buy a car.....if he did he would already own one

I don't think he has any money to buy a car.....if he did he would already own one

Who ever told you,you could think???

sent PM

http://www.ls1tech.com/forums/showthread.php?p=7456743#post7456743

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=005&sspagename=STRK%3AMESE%3AIT&viewitem=&item=150143855737&rd=1&rd=1

damn that's a deal, what's the reserve?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=005&sspagename=STRK%3AMESE%3AIT&viewitem=&item=150143855737&rd=1&rd=1

You have a PM.

i have a 99 ls1 with a 9" nitrous and aluma star wheels for 11,000 its for sale in here and on racing junk ad# 928052
went 7.40 in the 1/8

Where are you located???

i got a 2002 blue t/a ws6 408 w/ F1-R and TH-400 and ford 9'' ........9 sec over 650 rwhp with less that 15psi

let me know

Price???

Price???

take to pm please

Waiting on your PM.

my car is up for sale, check it out if you want.

pm-sent

Looking again.......

http://ls1tech.com/forums/showthread.php?t=937477

Let's try this again.......

Lets not.

Buy a gdam car already, lord knows plenty of people have shown you their fast cars for sale.

stop being a douchebag dreamer and pony up already.

And I don't care if I get warned/banned/ whatever the fuck.

Lets not.

Buy a gdam car already, lord knows plenty of people have shown you their fast cars for sale.

stop being a douchebag dreamer and pony up already.

And I don't care if I get warned/banned/ whatever the fuck.

Do you own this site or do you just have nothing else better to do with your time than to chime in with your worthless posts??

No one asked for your opinion and I sure could care less about it,so if you don't like my posts don't read them!! Easy enough for you to understand I would think but then again some people are just A LIIITTTLLLEEE SSSLLLLOOOWWW !!!

Bad as WS6. Mint condition and only the best parts.
http://www.ls1tech.com/forums/vehicle-classifieds/1271932-feeler-my-2002-ws6-possibly-sale-heavily-modded.html

I got a 2000 firebird v6 to a v8 swap, twin intercooled procharger at 7 psi has 3500 miles on it. beefed up trans to hold 500 and a lil more RWHP that has 2k on it, built 10 bolt with 3.73 gears, engine has 80k, trans has 2k, 10 bolt has 6k, gears are brand new, color is red, its an auto with t-tops, american racing headers with no cats thru a flowmaste, BMR chassis(k-member), hotskins strut tower brace, and a brand new steel driveshaft,chromed alum. stock rims. has comp cam valve springs. upgraded spark plugs. the car is fast. can hear that procharger whine, sounds good. also have a 10" MTX in the cubby hole in the trunk. Alpine headunit and high energy speakers all in the car. i am located in munster indiana(the region) which is 30 minutes from chi-town. Looking to get around 13,000 for the car but open to offers. If you are interested the best place to reach me is through PM's.

forgot to add it also has a new hatch with the high rise spoiler.

PM's sent.

http://www.ls1tech.com/forums/vehicle-classifieds/1261810-99-hugger-orange-z28-low-11sec-daily-driver.html

Weekend bump ........

If after almost 5 yrs you haven't found one you like I think it's safe to say your not going to.

yea i dont think this guy had any intention of buying a car. There are plenty of awesome cars that were posted. Go buy what you want and build it up yourself. Seems the only way you will get what you want

If after almost 5 yrs you haven't found one you like I think it's safe to say your not going to.


For your information I stopped looking for a few years.Now I am looking again.If you don't like it don't read my post.

yea i dont think this guy had any intention of buying a car. There are plenty of awesome cars that were posted. Go buy what you want and build it up yourself. Seems the only way you will get what you want

Looking for something turn key !!

Thanks for the bump anyway !!!

Block: Ls7 - dynoed - 558 hp to the wheels all motor
motor only has 366 miles on it
prothane motor mounts
arp main stud kit
heads : Et performance ls7 heads / w/ cometic head gaskets & arp 12 point head stud kit
cam : Custom ground cam - 256/264 .643/.646 intake 110 lobe separation 112
pushrods: Custom length hardened pushrods
lifters: Comp cams r-series roller lifters
rocker arms: Jesel shaft mount rockers
pistons: Diamond custom pistons
crankshaft: Callies dragon slayer crank & arp crank bolt
rods: Manley “billet” rods
cooling : Meziere electric water pump
manual fan switch two levels high and lo
induction: Ls - 7 intake manifold, nick williams 90 mm throttle body , ls7 mass air flow sensor, custom air intake routed to front bumper, throttle body bypass, and custom ram air for radiator cooling.
Fuel injectors: Bosch 52lb mini injectors
fuel pump: Racetronix
fuel rails: Ls7 fuel rails
ignition: Msd coil packs, msd spark plug wires, ngk- r series spark plugs
ati performace dampener
slp - double roller timing chain
ls6 - oil pump
exhaust system : Kooks 1-7/8” race headers w/ fel -pro race gaskets
magnaflow cat-back exhaust
dual qtp - electric cutouts coming straight off the
headers at the front of the y-pipe
transmission : 6-speed custom built with carbon fiber synchros steel shift
fork. Pro-5.0 shifter prothane transmission mounts
clutch: Exedy dual clutch kit with lightened flywheel
also installed mccloud slave cylinder
driveshaft: Dennys steel nitrous driveshaft
front suspension: Bmr tubular k-member and a-arms
qa-1 front struts and shocks adjustable
rear suspension: Bmr adjustable lower control arms
spohn shortened torque arm w/ driveshaft safety loop
bmr - adjustable panhard bar
qa-1 fully adjustable shocks
bmr springs

rear end: Moser 12 bolt w / abs sensor upgrade and 33 - spline upgrade
3:73 to 1 gears
brakes : Baer eradispeed cross - drilled and slotted rotors front and back, and hawk pads
wheels : Z06 motorsport chrome w/ rivets 18 x 9.5 - front
z06 motorsport chrome w/ rivets 18 x 10.5 - back
front tires : Bfg g force ta/kd 285/30/18
rear tires : Bfg g force drag radial 295/35/18

interior :camaro “ss” front floor mats
power door locks , power windows , cruise control , abs ,
defrost, air conditioning
wolfe racecraft 6-point 4130 roll bar w/swing out option on both doors. Powder-coated black
stereo: Alpine in-dash dvd model # iva-d105
7” monitor in each front sun visor (2 total)
7” monitor in the back headrest of each seat (2 total)
there are a total of 5 monitors in this car. All of them play dvd movies.
Amps: 1- rockford fosgate power t1001-bd (powers subwoofers)
1- rockford fosgate power t4004 (powers highs for internal speakers)
subwoofers : 3- 12” jl audio w6 subwoofers in custom box
capacitor in back , and also an extra yellow top optima battery to power the stereo system.


Exterior: Custom mecham paerformance hood
custom corvette z06 electron blue w/ silver pearl complete paint
job - including door jams and under hood/ trunk
custom chrome ss emblems
custom chrome camaro rear panel lettering
power retractable radio antenna
rolled back fender wells to allow clearance for bigger tires
slp “ss” front grill


all of these items have been professionally installed, and i have receipts to show. This car has been very well maintained, and i’m sure anyone who purchases it will be more than happy.motor only has 366 miles on it, and has never been raced. I would assume this car would run a mid - 10 second pass given the horsepower rating. But i can’t confirm that since it has never been raced. All the suspension and rear end have 3,500 miles on it. This car is basically a brand new car.

Very nice car but looking for an auto.

http://www.ls1tech.com/forums/vehicle-classifieds/1290843-2008-jsb-a6-procharged-widebody-corvette.html

doesnt really fit the criteria but saw 11sec v6 and thought you may be interested. i just posted my 80 regal with 04 5.3. runs great. has only gone 12.9 but i have a procharger and intercooler to go with it. you could easily make it 10 sec. good luck. sorry, too stupid to add pic. 5 pics in classifieds. thanks

Here you go, steal it for $8k.

http://www.ls1tech.com/forums/vehicle-classifieds/1244433-my-low-11-second-1997-camaro-z28-all-motor.html

Block: Ls7 - dynoed - 558 hp to the wheels all motor
motor only has 366 miles on it
prothane motor mounts
arp main stud kit
heads : Et performance ls7 heads / w/ cometic head gaskets & arp 12 point head stud kit
cam : Custom ground cam - 256/264 .643/.646 intake 110 lobe separation 112
pushrods: Custom length hardened pushrods
lifters: Comp cams r-series roller lifters
rocker arms: Jesel shaft mount rockers
pistons: Diamond custom pistons
crankshaft: Callies dragon slayer crank & arp crank bolt
rods: Manley “billet” rods
cooling : Meziere electric water pump
manual fan switch two levels high and lo
induction: Ls - 7 intake manifold, nick williams 90 mm throttle body , ls7 mass air flow sensor, custom air intake routed to front bumper, throttle body bypass, and custom ram air for radiator cooling.
Fuel injectors: Bosch 52lb mini injectors
fuel pump: Racetronix
fuel rails: Ls7 fuel rails
ignition: Msd coil packs, msd spark plug wires, ngk- r series spark plugs
ati performace dampener
slp - double roller timing chain
ls6 - oil pump
exhaust system : Kooks 1-7/8” race headers w/ fel -pro race gaskets
magnaflow cat-back exhaust
dual qtp - electric cutouts coming straight off the
headers at the front of the y-pipe
transmission : 6-speed custom built with carbon fiber synchros steel shift
fork. Pro-5.0 shifter prothane transmission mounts
clutch: Exedy dual clutch kit with lightened flywheel
also installed mccloud slave cylinder
driveshaft: Dennys steel nitrous driveshaft
front suspension: Bmr tubular k-member and a-arms
qa-1 front struts and shocks adjustable
rear suspension: Bmr adjustable lower control arms
spohn shortened torque arm w/ driveshaft safety loop
bmr - adjustable panhard bar
qa-1 fully adjustable shocks
bmr springs

rear end: Moser 12 bolt w / abs sensor upgrade and 33 - spline upgrade
3:73 to 1 gears
brakes : Baer eradispeed cross - drilled and slotted rotors front and back, and hawk pads
wheels : Z06 motorsport chrome w/ rivets 18 x 9.5 - front
z06 motorsport chrome w/ rivets 18 x 10.5 - back
front tires : Bfg g force ta/kd 285/30/18
rear tires : Bfg g force drag radial 295/35/18

interior :camaro “ss” front floor mats
power door locks , power windows , cruise control , abs ,
defrost, air conditioning
wolfe racecraft 6-point 4130 roll bar w/swing out option on both doors. Powder-coated black
stereo: Alpine in-dash dvd model # iva-d105
7” monitor in each front sun visor (2 total)
7” monitor in the back headrest of each seat (2 total)
there are a total of 5 monitors in this car. All of them play dvd movies.
Amps: 1- rockford fosgate power t1001-bd (powers subwoofers)
1- rockford fosgate power t4004 (powers highs for internal speakers)
subwoofers : 3- 12” jl audio w6 subwoofers in custom box
capacitor in back , and also an extra yellow top optima battery to power the stereo system.


Exterior: Custom mecham paerformance hood
custom corvette z06 electron blue w/ silver pearl complete paint
job - including door jams and under hood/ trunk
custom chrome ss emblems
custom chrome camaro rear panel lettering
power retractable radio antenna
rolled back fender wells to allow clearance for bigger tires
slp “ss” front grill


all of these items have been professionally installed, and i have receipts to show. This car has been very well maintained, and i’m sure anyone who purchases it will be more than happy.motor only has 366 miles on it, and has never been raced. I would assume this car would run a mid - 10 second pass given the horsepower rating. But i can’t confirm that since it has never been raced. All the suspension and rear end have 3,500 miles on it. This car is basically a brand new car.

Are you in California? Any interest in maybe a trade for a fully Built Forged Stroker with fully built auto and tons more C5 Corvette?

If you're interested I'll throw some tires on it, take it to the track and run it.

http://www.ls1tech.com/forums/vehicle-classifieds/1309995-2002-ls2-ss-cam-stall-n2o-c6-wheels-etc.html#post13644810

*edit* I'll probably forget about this thread in 5 minutes so PM me if you're interested LOL

If you're interested I'll throw some tires on it, take it to the track and run it.

http://www.ls1tech.com/forums/vehicle-classifieds/1309995-2002-ls2-ss-cam-stall-n2o-c6-wheels-etc.html#post13644810

*edit* I'll probably forget about this thread in 5 minutes so PM me if you're interested LOL

Looking for something closer to home.

Bump....

Hell I'd drive it out there for ya.

If you are still looking and want fast...... there isn't anything out there faster for the $$$$. Built and ready to go

http://www.ls1tech.com/forums/vehicle-classifieds/1319697-8-second-camaro-ss-stock-suspension-outlaw-drag-radial-x275-radial-grudge-race.html

Very nice car but out of my price range.

http://www.ls1tech.com/forums/vehicle-classifieds/1318739-200-ta-ws6-396ci-built-4l60e.html?highlight=200+ws6

Very nice car but out of my price range.

If you have some cast to add to that Street glide you have for sale, we could probably make a deal :D