Converter wont let it do the 2nd to 3rd shift?
03-16-2005, 08:42 PM
#1
8 Second Club
Thread Starter
iTrader: (76)
Join Date: Jun 2004
Location: Goshen NY
Posts: 2,902
Likes: 0
Received 0 Likes
on
0 Posts
Converter wont let it do the 2nd to 3rd shift? installed a TCS 4400 stall converter in my car and now on the 2nd to 3rd shift it hits the rev limiter then shifts.....kills me when im racing someone
03-16-2005, 09:38 PM
#5
Moderator
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,605
Likes: 0
Received 6 Likes
on
6 Posts
I've always just done it iteratively, creep it up until
I hit rev limit and then back it down 1-2MPH. The
high stall just lets your RPM run further ahead of
MPH under power and you have to see what your
MPH really is, at (say) 500RPM before limit wide open
and put it there.
What are your tuning options?
I hit rev limit and then back it down 1-2MPH. The
high stall just lets your RPM run further ahead of
MPH under power and you have to see what your
MPH really is, at (say) 500RPM before limit wide open
and put it there.
What are your tuning options?