Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

90 mm motor control TB for Z06

Thread Tools
 
Search this Thread
 
Old 03-31-2005, 10:07 PM
  #1  
TECH Resident
Thread Starter
iTrader: (9)
 
ChucksZ06's Avatar
 
Join Date: Feb 2005
Posts: 976
Received 1 Like on 1 Post

Default 90 mm motor control TB for Z06

I need a throttle body for my 402 in my z06. Do any of you sponsors sell one? Thanks.
Old 04-01-2005, 06:31 AM
  #2  
FormerVendor
iTrader: (53)
 
See5's Avatar
 
Join Date: Dec 2002
Location: Hobart, WI
Posts: 874
Likes: 0
Received 1 Like on 1 Post

Default

The LS2 is cheap and works great.
Old 04-01-2005, 06:45 AM
  #3  
6600 rpm clutch dump of death Administrator
 
J-Rod's Avatar
 
Join Date: Dec 2001
Location: Texas
Posts: 4,983
Likes: 0
Received 7 Likes on 7 Posts

Default

Originally Posted by See5
The LS2 is cheap and works great.

The stock Ls2 will work. It will cost you a bit of HP between 1-and 5 HP over some of the aftermarket TB's. Most folks report the tuning is easier with a GM TB over the aftermarket. We tuned the car we're racing with one of the first TB's out (Nick Williams #2 TB). In speaking with Nick he now has a TB which he reports has all the development issues resolved. So, he may be one to speak with also.




All times are GMT -5. The time now is 09:19 PM.